ZXFlasee（福視）C系列壓力容器X射線數字成像DR檢測系統-雨天 動漫 治愈 音樂-來一首DJ

福視C系列射線無損檢測系統針對壓力容器焊縫質量控制提供定制化解決方案。

◆ 環焊縫、縱焊縫：單壁單影、雙壁單影透照

◆ 采用通過式流水線檢測方式。

◆ 檢測模式可設置手動模式、示教模式、自動模式三種。

◆ X射線數字圖像處理測試等級滿足NB/T47013.11標準要求的AB級及GB/T17925-2011標準要求的AB級。

◆ 探傷評定依據滿足NB/T 47013.2標準要求。同時符合瓶規及容規要求。

◆ 檢測工裝的運動方式需同時滿足需方產品兩條環縫的DR探傷檢測工作的需要。

◆ 像質計的靈敏度符合NB/T47013.2標準規定要求。

◆ 圖像靈敏度：DR數字探傷圖像質量符合《NB/T47013.11-2015 X射線數字成像檢測》標準的AB級技術要求。

◆系統軟件包括缺陷標記（可直接插入代表的符號或文字：如氣孔、未熔合等）、缺陷尺寸測量標定功能；具備圖像和圖像中的相關信息的瀏覽和查找功能；包含窗口選擇、降噪、亮度和對比度增強等圖像處理功能；將經過降噪處理后的圖像數據保存為原始圖像數據。

◆圖像存儲采用標準的DICOM格式。工件編號、焊縫編號、透照厚度、透照工藝參數和幾何尺寸標定結果、缺陷判讀標記等信息可寫入圖像文件的圖像描述字段，這些信息應具備不可更改性。每幅檢測圖像文件可用文字注明工件編號、焊縫編號（A-縱縫、B-環縫）、檢測日期等必要的信息標識，這些信息標識在圖像存儲時直接寫入圖像文件，且不可更改。

選型表

射線管內置行走

外置雙壁檢測

型號

C型

C2型

C-D型

檢測工件尺寸

Φ700-3500mm L 15m

Φ700-3500mm L 15m

Φ500-4000mm L 15m

射線能量

160/225/320/450kV

160/225/320kV

225/320/450kV

焦點尺寸

金屬管：d=0.4 / d=1.0mm（EN12543）

平板尺寸

25x30cm

25x30cm / 43x43cm

25x30cm / 43x43cm

靈敏度

1-1.5%

1-1.5%

1-1.5%

分辨率

>3.0lp/mm

>3.0lp/mm

>3.0lp/mm

透照厚度

160kV：Fe 16mm/ Al 60mm(單壁)

225kV：Fe 25mm/ Al 120mm(單壁)

320kV：Fe 40mm（單壁）

450kV：Fe 50mm（單壁）

載重量

根據工件重量

整機功率

<10kW

<10kW

<10kW

進出件鉛門

電動

電動

電動

射線光路

水平透照

平板沿探臂行走，置于容器內

光路運動，容器靜止

水平透照

射線管沿探臂行走，置于容器內

光路運動，容器靜止

水平透照

射線管、平板均置于容器外

光路運動，容器靜止

X-ray Press Vessel or Cylinder Inspection Systems

160kV/225kV/320kV/450kV-ZXFlaseeC Digital X-ray System forX-ray Press Vessels or Cyinders

Description

RAYSOV ZXFlaseeC Digital X-ray System for X-ray PressVessels/Cylindes are used to examine the internal structureand of Press Vessels or Cylinders.

This system utilize X-rays to capture High-qulity real-timeimages of Press Vessels/Cylinders, assisting inspectors toidentify Weld Seam defects or issues that may bepresent.

and effectively check the porosity, shrinkage hole,porosity, shrinkage, slag inclusion and other defects of PressVessels/Cylinders.

◆ circumferential welds, longitudinal welds: single wallsingle projection, double wall single projection radiography
◆ The inspection is carried out using a through-line conveyorsystem.
The detection mode can be set to manual mode, teaching mode, orautomatic mode.
◆ The X-ray digital image processing test level meets there of NB/T 47013.11 standard for level A and B, and there of GB/T 17925-2011 standard for level A and B.
The nondestructive testing evaluation complies with there of NB/T 47013.2 standard. It also meets there of Cylinders and Pressure Vessels.
The movement of the inspection fixture must meet the needs of thecustomer's product for DR testing of two ring weldssimultaneously.
The sensitivity of the image meter meets the restipulated in NB/T47013.2 standard.
◆ Image sensitivity: The DR digital radiography image meetsthe AB level technical re of the NB/T47013.11-2015 X-rayDigital Imaging Inspection standard.
◆ The system software includes defect marking (can directly insertsymbols or words representing defects: such as pores, incompletefusion, etc.), defect size measurement calibration function; hasthe function of browsing and searching for images and relatedinformation; contains image processing functions such as windowselection, noise reduction, brightness and contrast enhancement;saves the image data after noise reduction as the original imagedata.
◆ Image storage uses standard DICOM format. The welding workpiecenumber, weld seam number, penetration thickness, penetrationprocess parameters, geometric dimension calibration results, anddefect interpretation marks can be written into the imagedescription field of the image file. These information should havean unchangeable property. Each detection image file can be markedwith necessary information identification, such as weldingworkpiece number, weld seam number (A-longitudinal seam,B-circumferential seam), and inspection date, etc. Theseinformation identifications are directly written into the imagefile during image storage and cannot be changed.