PTMegaB 感應式電子回旋加速器
- 報價
- ¥1500000.00元每套
- 聯系手機
- 15668834640
- 微信號
- 15668834640
- 高能射線源
- 高能電子回旋加速器
- 加速器型號
- PTMegaB-7MeV
- 焦點尺寸
- 不大于0.3*2mm
PTMegaB感應式電子回旋加速器
感應式回旋加速器具有較高性價比,較低維護成本。
設備體積小、重量輕,為直線加速器的1/4,輻射器重量?jī)H100kg,位置擺放便捷,透照較大工件,運動靈活。由于不需要直線加速器所配置的行車和軛架,雖然防護墻厚度與直線加速器基本相等(1.5m,防護室的高度、面積可大大縮小,降低防護室建設成本。調制器部分以風冷替代水冷,降低故障環節,受環境影響較小。
因此,感應式電子回旋加速器廣泛應用于大型工件的鑄造、焊接,電力,橋梁、混凝土檢測,安檢等領域。
特點
ü 終身使用!
ü 7MeV(原7.5MeV新改進型)
ü 高能量,小劑量符合環保要求
ü 可配合高能平板探測器數字成像,使用靈活
ü 可靠性好,運行穩定,可用于長期穩定工作
ü 維護成本低,僅需定期更換加速管,費用較直線加速器大幅降低
1. 電子束能量:7MeV能量3.0-7MeV可調。
2. 可達到的相質靈敏度:至少在厚度50~200mm(A3鋼)檢測范圍內,照相靈敏度達到1-2T(ASTM孔型像質計或1%線型像質計)
3. 劑量率:≥10cGy/min(射線中心軸線上距靶1m處)
4. 焦點尺寸:≤0.3X2mm
5. 輻照視野:射線中心束與邊束夾角≤15°
6. 射線均勻度: X射線均勻度>60%(在偏離X射線中心軸線±7.5°處的劑量率與0°方向中心軸線上劑量率的百分比.
7. 劑量穩定性及劑量達到穩定所需時間:劑量穩定性≤2%,劑量達到穩定所需時間≤10s。
8. 連續工作時間每晝夜不少于10小時。在接通風扇情況下,工作45分鐘,休息15分鐘。
9. 功率3.5kW
10. 工作條件:
環境溫度:0-50℃
相對濕度:85%
曝光曲線
供貨范圍
輻射器(帶托架) 760×450×400mm 125kg
電源箱 550×370×460mm 35kg
控制器 130×200×35mm 2.2kg
輻射安全警示部分 Ф130×80mm 1.5kg
控制電纜 25m
輻射器電纜 5m
報警燈電纜 25m
PTMegaBBetatron Electron Cyclotron
l Betatron has high costperformance, lower procurement cost (the sameclass as 4MeV linear accelerator), lower maintenancecost.
l This betatron system is smallin size and light in weight, the weight of the radiator is only100kg, the position is convenient, the larger test object is illuminated, and themovement is flexible. Although the thickness of the protective wallis basically the same as that of LINAC linear accelerator (1.5m),the height and area of the protection chamber can be greatlyreduced.The modulator is cooled by air instead of water, whichreduces the fault link and is less affected by theenvironment.
l betatron system is widelyused in large test object casting, welding,electricpower, bridge, concrete detection,security and otherfields.
Features
l lifetimeuse!
l 7MeV (the latest improvedversion of the original 7.5MeV)
l High energy, small dose meetsenvironmental protection requirements
l Can be used with high-energyflat panel detector digital imaging, flexible use
l Good reliability, stableoperation, can be used for long-term stable work
l Low maintenance cost, only needto replace the accelerator tube regularly, the cost is much lowerthan that of linear accelerator
Technicalindicators—7MeV
1. Electron beam energy: 7MeVenergy 3.0-7MeV adjustable.
2. Achievable phase y: at least in the detection range of thickness 50-200mm(A3 steel), the photographic sensitivity reaches 1-2T (ASTM holetype image meter. Or 1% line type image meter).
3. Dose rate: ≥10cGy/min (1mfrom the target on the central axis of X-ray)
4. Focus size:≤0.3X2mm
5. Irradiation field of view:the angle between the center beam and the side beam is≤15°
6. Radiation uniformity: X-rayuniformity >60% (the percentage of dose rate at ±7.5° deviatingfrom the X-ray central axis to the dose rate on the central axis inthe 0° direction.
7. Dose stability and theuired for the dose to reach stability: the dose stability isless than or equal to 2%, and the time required for the dose toreach stability is less than or equal to 10s.
8. Continuous working hoursshall not be less than 10 hours per day and night. With the fanturned on, work for 45 minutes and rest for 15 minutes.
10. Maximum power3.5kW
11. workingconditions:
ambienttemperature:0-50℃
Relative humidity:85%
Scopeof supply
Radiator (withbracket) 760×450×400mm
125kg
Power box 550×370×460mm
35kg
Controller 130×200×35mm
2.2kg
Radiation SafetyWarning Section Ф130×80mm
1.5kg
ControlCable
25m
RadiatorCable
5m
Alarm LightCable
25m
X射線探傷機,X射線探傷儀,高頻高壓發生器,電子回旋加速器,直線加速器,X射線機,X射線管,X射線源,X射線管組件,平板探測器,線陣探測器,工業CT檢測系統,X射線數字成像檢測系統,焊管X射線數字影像檢測系統,輪轂X射線數字影像檢測系統等及其組件,配件
公司簡介銳新射線(RAYSOV Instrument)(丹東銳新射線儀器有限公司)成立于2009年,是專門從事射線數字影像系統(DR)解決方案的高科技公司。2019年10月,無錫銳新精視科技有限公司成立,專注于工業CT、電子直線加速器等高端產品研發與制造,并作為公司保障華東、華中市場運營及服務的重大戰略支撐,更加優質高效的為客戶提供滿意的產品與服務。銳新射線致力于為客戶提供可靠、高效、智能的X射線可視化質量控制解決方案,在汽車輪轂、異型...