插點煙器型汽車座椅加熱系統

一綜合說明

此款產品是我們多年研究的結晶,在控制方面采用微電腦控制,升溫快，溫度任意調節,同時有30分鐘定時功能.組成更為簡單,車主十分鐘即可安裝完畢，具有通用性，給用戶帶來方便。

二是您冬季的好伴侶

在每年寒冷的冬季,它升溫快,溫度任意調節,使您的腰酸腿疼有一定的緩解作用,對健康者-有一定的保健作用,可避免因寒風的入侵所引發的疼痛.

三安裝方法

1.將加熱體分別利用對插件固定在汽車座椅的座和靠背上。而后兩片加熱片的接插件對插。

2.將加熱體的電極引出線在座椅下面與控制器的插件對接。

3.將溫度控制器插到汽車點煙器的插座中，這時座椅加溫系統就安裝好了.

四使用方法

1.將溫度控制器的開關從細的符號方向向粗符號方旋轉,這時電源燈和調溫?zé)敉瑫r(shí)亮,紅燈為升溫工作燈,綠燈為電源燈.

2.調溫開關上的溫度指示符號越粗表示溫度越高.即向粗符號方向旋轉到某一位置不動后,表示把溫度設定在此點上.

3.如果在使用一段時間后發現溫度較高,這時可向細符號方向旋轉,將溫度設定低一些.

4.如果要關掉加熱系統,只需將調溫開關旋到溫度調節符號Zui小處后即可,這時控制器上的燈全部滅掉.

5.具有定時功能:

此控制器有30分鐘定時功能,到30分鐘后會自動關掉升溫系統,如果需要繼續使用,只需關了開關后再開一次即可.因?yàn)槠囉袃煞N功能的點煙器,一種是關閉發動機后點煙器上沒有電源輸出,另一種是關閉汽車發動機后點煙器上仍有電源輸出,這時如果忘關加溫系統,停放一夜后汽車電瓶的電會被用掉一部分,造成第二天早晨啟動不了汽車.所以才設計了定時功能.

汽車座椅加熱系統car seat heating system

一綜合說明general information
此款產品是我們多年研究的結晶,在控制方面采用微電腦控制,溫度任意調節,同時有30分鐘定時功能.組成更為簡單,只有兩部分,由插到點煙器上的控制器和連體熱片組成.發熱部分采用高科技發熱材料,升溫快.this product is the result of our effort on researching anddeveloping through many years, the control system is controlled bythe micro-computer, the temperature is adjusting freely, with30minutes timing function. the product is made by only twosections, the controller which is plug in to the cigarette-plugplus pads, the heating element is adopted by hi-tech heatingmaterial, with the character of temperature raising rapidly.

二是您冬季的好伴侶your best companion in winter season
在每年寒冷的冬季,它升溫快,溫度任意調節,使您的腰酸腿疼有一定的緩解作用,對健康者-有一定的保健作用,可避免因寒風的入侵所引發的疼痛.inevery cold winter, this product will reducing your painful of yourwaist and back through it’s rapidly temperature-raising andtemperature-adjusting, it healthy to the people, to live away fromthe painful caused by cold wind.

三安裝方法installation guide
1.將座椅的外座套取下,而后將發熱片的背面雙面膠撕開,再將發熱片粘貼到座和靠背上,再把座套套好.貼熱片時座和靠背粘貼時要成直角takeout the outer cover of the seat, tear off the double-side sticky,stick the heating pad into the bottom and back from the seat, thenre-cover the seat cover, it should be a 90degree angle whilesticking the bottom and back

2.將加熱體的電極引出線從座和靠背的中縫處放于座椅下面.put the extend wire from electrodeat the bottom of the seat where the position of the seat andback

3.將溫度控制器插到汽車點煙器的插座中.而后將控制器的插頭和發熱體的插座在座椅下方對接,這時座椅加溫系統就安裝好了.plugthe temperature controller into the cigarette-plug, to connect theconnector of controller with the connector of the heating padsunder the seat, then the whole heating system is installedwell.

四使用方法user’s manual
1.將溫度控制器的開關從細的符號方向向粗符號方旋轉,這時電源燈和調溫?zé)敉瑫r(shí)亮,紅燈為升溫工作燈,綠燈為電源燈.turn theswitch of the temperature controller from thin-sign to thethick-sign, the indicator of power and temperature-adjusting willbe light-on at the same time, the red-indicator mean temperatureraising indicator, the green-indicator means power indicator.

2.調溫開關上的溫度指示符號越粗表示溫度越高.即向粗符號方向旋轉到某一位置不動后,表示把溫度設定在此點上.the changesof thicker-sign of temperature indicator from temperature adjustingswitch means raising the temperature steadily, the temperature willbe set up wile you turn the switch to the thicker-sign and stay ina certain position.

3.如果在使用一段時間后發現溫度較高,這時可向細符號方向旋轉,將溫度設定低一些.if you feel thetemperature is higher after you using it for a certain time, toreduce the set up temperature by turning the switch to thethinner-sign.

4.如果要關掉加熱系統,只需將調溫開關旋到溫度調節符號Zui小處后即可,這時控制器上的燈全部滅掉.if you wantswitch off the heating system, just turn the temperature adjustingswitch into the minimize of the sign, the indicator from thecontroller will be off at this time.

5.具有定時功能timing function

此控制器有30分鐘定時功能,到30分鐘后會自動關掉升溫系統,如果需要繼續使用,只需關了開關后再開一次即可.因?yàn)槠囉袃煞N功能的點煙器,一種是關閉發動機后點煙器上沒有電源輸出,另一種是關閉汽車發動機后點煙器上仍有電源輸出,這時如果忘關加溫系統,停放一夜后汽車電瓶的電會被用掉一部分,造成第二天早晨啟不著車.所以才設計了定時功能.thiscontroller has the ability of timing with 30minutes, the systemwill be shut off the automatic temperature raising after 30minutes.if you want go on to use it, just switch off the switch and open itonce again. this design is for that there are two functions ofcigarette from the car one is, there is no power on after switchoff the engine. another on is, there is still power on from thecigarette-plug after switch off the engine, for this kind ofcigarette, if you forget to switch off the heating system, it willbe consumed some power from car battery after one nigh parking,then it will cause the car starting trouble at the second morning,that’s the reason of this function desiged

五注意事項attention
1.控制器的點煙器插頭要和汽車上的點煙器插座要插接牢固.it should be a solid connection betweenthe plug from controller with the cigarette-plug from the car

2.發熱體要與汽車主駕駛的座和靠背粘貼牢固,并成直角.the heating pads should be sticksolidly and in 90degree angle to the bottom and back from the seatof car driver

新產品介紹五檔撥輪分控

一綜合說明
此款產品是我們多年研究的結晶,在控制方面采用微電腦控制,溫度任意調節，組成更為簡單,只有兩部分,由控制器和連體熱片組成.發熱部分采用高科技發熱材料,升溫快.

二是您冬季的好伴侶
在每年寒冷的冬季,它升溫快,溫度任意調節,使您的腰酸腿疼有一定的緩解作用,對健康者有一定的保健作用,可避免因寒風的入侵所引發的疼痛.安裝后使您的車有了高檔車的享受。
三安裝方法
1.將座椅的外座套取下,而后將發熱片的背面雙面膠撕開,再將發熱片粘貼到座和靠背上,再把座套套好.貼熱片時座和靠背粘貼時要成直角.

2.將加熱體的電極引出線從座和靠背的中縫處放于座椅下面.

3.將溫度控制器插到汽車原預留孔中.而后將控制器的插頭和發熱體的插座在座椅下方對接,這時座椅加溫系統就安裝好了.

四使用方法
1.溫度控制器開關有三種：五檔撥輪，九檔撥輪，高低檔開關。將溫度控制器的開關從0，1，2，3，。。。的符號方向旋轉即為把溫度設在這些檔位。這時電源調溫?zé)敉瑫r(shí)亮,紅燈為升溫工作燈.

2.調溫開關上的溫度指示符號越大表示溫度越高.即向數字大的符號方向旋轉到某一位置不動后,表示把溫度設定在此點上.

3.如果在使用一段時間后發現溫度較高,這時可向數字小的方向旋轉,將溫度設定低一些.

4.如果要關掉加熱系統,只需將調溫開關旋到溫度調節符號Zui小處“0”后即可,這時控制器上的燈全部滅掉.

5．九檔開關的使用和五檔一樣。高低檔控溫時，只有兩檔，高檔和低檔。中間檔為關。
五注意事項
1.控制器的插頭要和線上的插頭要插接牢固.

2.發熱體要與汽車主駕駛的座和靠背粘貼牢固,并成直角.

六．加熱片的規格：
46cmx46cm;46cmx26cm;40cmx40cm;開孔熱片，異形熱片，尺寸可按用戶要求生產。
七．功率：
20w,25w,30w,40w,45w,50w,55w,60w,65w,70w,75w,80w,85w,90w,95w,100w,110w,120w.

八．配套：

〈1〉。我們已給國內外多家整車廠配套?！?〉。是汽車美容，汽車裝飾，汽車維修，4s店產品?！?〉。私家車也可方便安裝。