R-210 Self Stripping Liquid Release Gallon

Directions: On a clean surface apply a small amount with brush,spray, or cloth. Be sure entire area is covered. Allow to dry andbrush or wipe off. Excellent on nonskid, grained or sand typefinishes. Repeat as re Liquid mold release is recommendedfor use on fully cured, well conditioned molds only. It is notrecommended on new or reconditioned molds until eight or ten partshave been pulled using paste wax. It should not be used as a finalcoat over paste wax as the high solvent content is provided toremove wax and wax build up. Rapid settling of liquiduires shaking before and during each use. Each user isencouraged to prepare a test part for his or her particularapplication.