品牌同瑞型號33-47別名縫管錨桿用途巷道支護管縫式錨桿slit wedge tubingbolt

slit wedge tubing boltseries

材 質material20mns、20mn、16mn（q345）規 格(mm)specificationφ 33、φ 39、φ 42、φ 47四種系列。four series

管縫式錨桿系列

slit wedge tubing boltseries

管縫式錨桿又名縫管錨桿,該錨桿是主動加固圍巖全錨固立即承載等優點,安裝于比管徑稍小的鉆孔中,可立即在全長范圍內對孔壁施加徑向壓力防止圍巖下滑.在爆破振動圍巖位移情況下,錨固力明顯增大,支護效果更加理想.

slit wedge tubing bolt , also known asseam anchor bolt has many advantages such as consolidate asurrounding rock on self"s own initiative, active reinforcementanchorage and immediately bearing etc. the bolt is installed in ahole which has smaller diameter than it. it can immediately imposefull range radial pressure on the wall of the hole to prevent rockfall. in case of blasting vibration displacement of surroundingrock, anchoring increases significantly, and supporting effect isideal.

該產品主要銷往澳大利亞、美國、印尼、菲律賓等國家。

the products are mainly exported toaustralia, the united states, indonesia, the philippines and othercountries.

山東同瑞礦業科技有限公司專業研發制造新型支護用品，可以根據不同礦山企業的要求定制各種產品。

shandong tongrui mining technologyco., ltd with the manufacturer specialized in developing newsupport products, according to different re of a varietyof customized products from different mining companies.

管縫式錨桿鉆孔孔徑推薦計算方法：

the best consumption of feed tubediameter drilling anchor

巖層中：

the rock stratum

鉆孔直徑=（0.9-0.95）×錨桿直徑

borehole diameter=（0.9-0.95）×bolt diameter

錨桿鉆孔深度:錨桿長度+100mm

anchor drilling depth: anchorlength+100mm

鉆孔偏斜率＜1%

drilling partialslope＜1%

煤層中：

coal seam

鉆孔直徑=(0.9-1.00)×錨桿直徑

borehole diameter =（0.9-1.00）×bolt diameter

錨桿鉆孔深度:錨桿長度+200mm

anchor drilling depth: anchorlength+200mm

鉆孔偏斜率<1.5%

drilling partialslope＜1.5%

管縫式錨桿系列

slit wedge tubing boltseries

使用方法

method of application

(1)依據設計要求確定錨桿孔位，用鉆機具打孔。

according to the re ofdesign, drill a hole with punching

(2)用壓風吹盡孔內巖粉。

use wind pressure to blast the rockpowder of the hole

(3)桿體裝上錨盤，用沖擊鉆將錨桿打入孔中。

rod anchor plate fitted with a shockwill bolt into the hole drill

技術優點

technical advantages:

高強托盤其承載力大于桿體承載力，擋環拉脫力大于桿體的承載力。

high-strength tray bearing capacity,the rod body than retaining ring pull off the bearing force thanpole

產品系列series規格specifications承載力(kn)高強托盤high-strengthtray長度length（mm）高強托盤(球形)high-strengthtray(sphere)承載力(kn)bearing forcemf-33系列seriesmf-3333×2.5100120×120×5.0≥100914-300033×3.0120120×120×6.0≥120914-300mf-39系列seriesmf-3939×2.5130150×150×5.0≥×3.0150150×150×6.0≥1801200-300mf-42系列seriesmf-4242×2.5140150×150×5.0≥×3.0160160×150×6.0≥1801400-300mf-47系列seriesmf-4747×2.5150150×150×6.0≥×3.0170150×150×6.0≥

管縫式錨桿系列

dimenionsfs-33fs-39fs-46taper diameter a1-1/8” (28mm)1-3/16” (30mm)1-1/2” (38mm)taper length b2-3/8” (60mm)2-1/2” (65mm)2-1/2” (65mm)slot width c1/2” (13 mm)5/8” (16 mm)7/8” (22mm)steel thickness d3/32” (2.5mm)3/32” (2.5mm)1/8” (3mm)bolt size e1-5/16” (33mm)1-1/2” (39mm)1-13/16” (46mm)technicaldatafs-33fs-39fs-46recommended nominal bitsize1-3/16” to 1-5/16”
(31 to 33 mm)1-3/8” to 1-1/2”
(35 to 38 mm)1-11/16” to 1-3/4”
(43 to 45 mm)available tubelengths3’to 8’
(0.9 to 2.4 m)3’to 10’
(0.9 to 3.0 m)3’to 12’
(0.9 to 3.7 m)typical breakingcapacity24,000 lbs
(107 kn)28,000 lbs
(124 kn)40,000 lbs
(178 kn)minimum breakingcapacity16,000 lbs
(71 kn)20,000 lbs
(89 kn)30,000 lbs
(133 kn)recommended initialanchorage3 to 6 tons
(27 to 53 kn)3 to 6 tons
(27 to 53 kn)6 to 10 tons
(53 to 89 kn)ultimate axialstraintypical 16%