A2695水性固化劑科思創一級代理商源禾緣禾-國產精品黃在線觀看免費軟件_人妻體內射精一區二區三區メイリン モデルコレクション メ
- 報價
- 請來電詢價
- 聯系手機
- 18918158830
Bayhydrol A XP 2770
Solubility / thinnability Bayhydrol? A XP 2770can be thinned with water in
any ratio.
Properties / Applications Bayhydrol? A XP 2770 is ahydroxyfunctional
polyacrylic dispersion which can be thinned with
water to application viscosity. Bayhydrol? A XP
2770 combined with aliphatic polyisocyanates
yields high-gloss top coats which can be dried
at room temperature or force-dried, e.g.at 80℃
The cured paint films are hard and flexible with
outstanding resistance to solvents and water and
excellent weatherability.
When properly formulated, e.g.in combination with
Bayhydur? 304 in an NCO / OH ratio of 1.5 : 1,
the pot life is approx. 4 hours.
Bayhydrol? A XP 2770 has good pigment wetting
properties and high shear stability. Bead mills
have proved suitable as grinding e Only
pigments and extenders with a minimum water-soluble
content should be used. Given the many pigments
and extenders available, compatibility testing
should always be carried out.
When mixing Bayhydur? or Desmodur? into the mill
base, a thickener must be added to ensure a high
shear effect.
The addition of approximately 0.4 % Borchigen?
PW 25 (calculated on the solid binder) has proved
suitable for formulations based on Bayhydrol? A
XP 2770.
Levelling and substrate wetting can be optimised
by adding, for example Byk? 349 and Byk? 378.
Byk? 011 has proved to be a suitable antifoam.
Application and formulation e can be cleaned
with water, alkaline cleaning agents or isopropanol.
Storage - Storage in original sealed Bayer MaterialScience
containers.
- Recommended storage temperature: > 0 - 30 °C.
- Protect from frost, heat and foreign material.
General information: Short-time cooling down to
-18 °C does not typically damage the product.
Prolonged freezing can damage the product
irreversibly.
Prolonged storage at higher temperatures may result
in a decrease of viscosity and/or an increase of
average particle size, possibly resulting in
sedimentation or coagulation.
The viscosity of the product is largely governed
by the pH. As the pH may decrease during storage,
a decrease in viscosity is also to be expected. The
viscosity can be adjusted to its original value by
the addition of small amounts of an aqueous 10 %
solution of dimethyl ethanol amine.
Contamination with certain bacteria, fungi or algae
may render the product unusable.
Storagetime Bayer MaterialScience represents that, for a period
of six months following the day of shipment as stated
in the respective transport documents, the product
will meet the specifications or values set forth in
section "specifications or characteristic data" above
what ever is applicable, provided that the product is
stored in full compliance with the storage conditions
set forth in and referenced under section "storage"
above and is otherwise handled appropriately.
The lapse of the six months period does not
necessarily meanthat the product no longer meets
specificationsor the set values. However, prior to
usingsaid product, Bayer MaterialSciencerecommends
totest such a product if it still meets the
specificationsor the set values. Bayer
MaterialScience does not make any representation
regarding the product after the lapse of the six
months periodand Bayer MaterialScience shall not
be responsible or liable in any way for the
product failing to meet specifications or the
setvalues after the lapse of the six months
period
Safety Hazards identification Not classified as a hazardous
product as per Council Directive 2006/121/EC or
1999/45/EC.
The safety data sheet should be observed.Thiscontains
information on labeling, transport and storage aswell
as on handling, product safety and ecology.
Important This is a Trial Product of which we do not yet have
extensive experience.
No guarantee can therefore be given regarding the
behaviour of the product during processing or use.
Compatibility Suitable co-reactants for the formulation of
aqueous two-component polyurethane systems include
Desmodur? N 3400, N 3600, N 3800 or N 3900,
Bayhydur? 3100, 304, 305, 401-70, XP 2487/1,
XP 2655 or XP 2759.
科思創 , 一級代理商 , 源禾 , 緣禾 , 水性固化劑 , BayhydrolA2695
科思創原拜耳水性聚氨酯、科思創原拜耳水性固化劑，科思創原拜耳溶劑型樹脂、科思創原拜耳溶劑型固化劑，湛新紐佩斯樹脂，水性啞光樹脂，手感助劑，絨毛粉，增稠劑，潤濕劑等環保型原材料等
化工原料及產品（除危險化學品，監控化學品，煙花炮竹，民用爆炸物品，易制毒化學品）、建筑裝潢材料（鋼材、水泥除外）、水性涂料、包裝材料、橡塑制品、機械設備及配件、五金交電、辦公文化用品、勞防用品的批發、進出口、傭金代理（拍賣除外），并佩戴相關配套服務。
緣禾化工（原源禾化工）是德國科思創公司Covestro（原拜耳材料科技），湛新紐佩斯公司，Supercolori 等公司的一級代理商。應用領域：水性工業涂料、水性地坪及墻面涂料、水性木器涂料、水性塑料涂料、，水性柔感涂料，水性軌道交通涂料，水性可剝離涂料、水性啞光光油、水性紡織漿料、水性紡織涂布，水性皮革涂飾，水性油墨，紙張印刷，導電涂料及其他特種涂料等。...