1102-01A（1102-02A）一起買實(shí)惠-成人小說(shuō) 都市激情 校園激情 武俠 玄幻|比較開放的免費(fèi)社交軟件

1102-01A（1102-02A）抓緊機(jī)遇、1102-01A（1102-02A）讓利多銷

PCB L&T Canister load cell,50 lbf (222 N) rated capacity, 50% static overload protection,2mV/V output, 1/4-28 UNF-2B threads, PT02E-10-6P connector,aluminum constructio

Measurement Range: 50 lb (222 N)

Size - Diameter: 2.75 in (69.9 mm)

Size - Height: 1.5 in (38.1 mm)

Electrical Connector: PT02E-10-6P

Product NotesAccessories:

PERFORMANCEMeasurement Range50 lb222 N[1] Sensitivity (±10 %)2mV/V2 mV/V[2] Non-Linearity≤0.05 % FS≤0.05 % FS
Hysteresis≤0.05 % FS≤0.05 % FS
Non-Repeatability≤0.02 % FS≤0.02 % FS
Creep (in 20 minutes)≤.025 %≤.025 %
Static Error Band≤.05 % FS≤.05 % FS
Eccentric Load Sensitivity≤0.25 %/in≤0.25 %/25.4mm
Resonant Fre kHz2.8 kHz
ENVIRONMENTALOverload Limit75 lb334 N
Load Limit (Side Force, FX or FY)50lb222 N[3] Load Limit (Bending Moment, MX orMY)50 in-lb5.6 Nm[3] Load Limit (Axial Torque,MZ)35 in-lb4 Nm[3] Temperature Range(Operating)-65 to +200 °F-54 to +93 °C
Temperature Range (Compensated)+70 to +170 °F+21 to +77 °C
Temperature Effect on Output (Maximum)±0.0015 %Reading/°F±0.0027%Reading/°C[4] Temperature Effect on Zero Balance(Maximum)±0.0008 %FS/°F±0.0015 %FS/°C[4] ELECTRICALBridgeResistance700 Ohm700 Ohm[5] Excitation Voltage (Recommended)10VDC10 VDC[6] Insulation Resistance>5000000000Ohm>5000000000 Ohm
Zero Balance≤1 % FS≤1 % FS
Output Polarity+Tension+Tension
PHYSICALSize - Height1.5 in38.1 mm[7] Size - Diameter2.75in69.9 mm[7] Weight0.67 lb304 g
Mounting Thread1/4-28 FemaleNo Metric Equivalent
Housing MaterialPainted AluminumPainted Aluminum
Sensing ElementStrain GageStrain Gage
Deflection at Full Scale Capacity0.003 in0.08 mm
Electrical ConnectorPT02E-10-6PPT02E-10-6P
All specifications are at room temperature unless otherwisespecified.

[1] FS - Full Scale.
[2] RO - Rated Output.
[3] Singularly applied, i.e. no other extraneous loads.
[4] Over compensated operating temperature range.
[5] Nominal.
[6] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[7] See Outline Drawing 51277 for Complete Dimensions

Optional181-012APT06A-10-6S(SR)(1)
8311-01-10ACABLE(1)
If you don’t see what you are looking for, give us a call at(800) 828-8840 or email us (by clicking here) and one of ourteam members will help you.

37 Matches

1203-12A/084A100

1203-13A/084A100

1380-02A

1380-03A

1380-01A

1381-01A

1381-02A

1630-06C

1403-05ADB

1404-03ADB

1404-12A/084A101

1102-01A

1102-05A

1203-14A/084A100

1203-15A/084A100

1204-13A/084A101

1403-12A/084A100

1403-14A/084A100

1403-15A/084A100

1404-13A/084A101

1631-04C

1631-06C

1102-02A

1102-03A

1102-04A

1203-11A/084A100

1204-12A/084A101

1381-04A

1403-11A/084A100

1403-13A/084A100

1404-02ADB

1408-02ADB

1411-02ADB

1630-03C

1630-04C

1631-01C

1631-03C

Impact Hammers

Each PCB? Modally Tuned?, ICP? instrumented impact hammerfeatures a rugged, force sensor that is integrated into thehammer’s striking surface.

“Modal Tuning” is a feature that ensures the structuralcharacteristics of the hammer do not affect measurement results.This is accomplished by eliminating hammer resonances inuency range of interest from corrupting the test data,resulting in more accurate and consistent measurements.

The force sensor provides a measurement of the amplitudeuency content of the energy stimulus that is imparted to a testobject. Accelerometers are used in conjunction with the hammer toprovide a measurement of the object’s structural response due tothe hammer blow. A variety of tips supplied with each hammer permitthe energy content of the force impulse to be tailored to suit there of the item under test. 
Using multi-channel data ac and analysis software, thetest engineer is able to ascertain a variety of mechanicalproperties leading to an understanding of an object’s structuralbehavioral characteristics. Items analyzed can include resonancedetection, mode shapes, transfer characteristics, and structuralhealth – such as crack and fatigue detection.

Highlights:

Modally Tuned? to provide more consistentresults

Variety of hammers to suit any size test object

Assortment of tips offer frequency tailoredimpulse

Applications:

Structure Health Testing

Resonance Determination

Modal Analysis

How do I select an impact hammer for my application?

The general rule of thumb to follow is the larger thestructure to excite, the larger the impact hammer re Someselection guidelines are as follows: 
086E80  Electronic Components such as Printed Circuit Boards &Hard Drives
086C01   (TLD086C01) Small Structures, lightly damped panels & frames 
086C02, C03, & C04  Mediumsized structures such as Car Frames, Engines, & MachinedParts
(TLD086C02, C03, & C04) 

086D05  (TLD086D05) Heavier sizedcomponents such as Pumps & Compressors

086D20  (TLD086D20) Heavy Structures suchas Tool Foundations & Storage Tanks
086D50  (TLD086D50) LargeStructures such as Buildings, Bridges, & Ships

Models with TEDS include the TLD prefix suchas TLD086C01.
For additionalinformation: TEDS Sensors and Technology