Model: 4115K-03A
PCB L&T Torque Sensor,Rotary Transformer, 200 in-lb Capacity FS, Flanges and Splines perAND10262 & AND20002
Speed sensor soldseparately.
Measurement Range: 200 in-lb (23 Nm)
Sensitivity: (±15%) 2.5 mV/V (2.5 mV/V)
Non-Linearity: <=0.05 % FS
Mounting: Flange w/ Splined Shaft
Maximum Speed: 15000 RPM
English:SI:
PERFORMANCEMeasurement Range (Full Scale Capacity)200 in-lb23Nm[1] Sensitivity (±15 %) (output at rated capacity)2.5mV/V2.5 mV/V[1][2] Non-Linearity≤0.05 % FS≤0.05 %FS[2] Hysteresis≤0.05 % FS≤0.05 %FS[2] Non-Repeatability≤0.03 % FS≤0.03 %FS[2] ENVIRONMENTALOverload Limit600 in-lb68 Nm
Temperature Range (Operating)-65 to 285 °F-54 to 141 °C
Temperature Range (Compensated)+70 to +170 °F+21 to 77 °C
Temperature Effect on Output (Maximum)±0.002 %Reading/°F±0.0036%Reading/°C[3] Temperature Effect on Zero Balance(Maximum)±0.002 %FS/°F±0.0036 %FS/°C[2][3] ELECTRICALBridgeResistance350 Ohm350 Ohm[1] Excitation Fre kHz3.28kHz
Excitation Voltage2 to 10 VAC rms2 to 10 VAC rms[4] InsulationResistance>5000000 kohm>5000000 kohm
Zero Balance≤2 % FS≤2 % FS[2] Bridge Current (at 5 VAC)50 mA50mA
PHYSICALSize - Shaft Length9.56 in242.82 mm
Size - Housing Length8.25 in209.55 mm
Size - Housing Height6.00 in152.40 mm
Weight47 lb21.3 kg
MountingFlange w/ Splined ShaftFlange w/ SplinedShaft[5] Sensing ElementStrain GageStrain Gage
Housing MaterialBlack Oxided SteelBlack Oxided Steel
Shaft MaterialSteelSteel
Electrical ConnectorMS3102A-14S-5PMS3102A-14S-5P
Torsional Stiffness33000 in-lb/radian3700 N-m/radian
Rotating Inertia0.0050 in-lb sec20.0006 N-m sec2
Maximum Speed15000 RPM15000 RPM
All specifications are at room temperature unless otherwisespecified.
Product Notes
[1] Nominal.
[2] FS - Full Scale.
[3] Over compensated operating temperature range.
[4] Recommended 10 VAC RMS.
[5] Mounting per AND10262 and AND20002.
[6] See PCB Declaration of Conformance PS062 for details.
Accessories:
Supplied180-019A5-socket mating connector for Series 3100, 4100,4200 torque sensors(1)
8113-105ARelay activated precision shunt calibration module(1)
Model: 4115K-06AEnglish:SI:
PERFORMANCEMeasurement Range (Full Scale Capacity)1000 in-lb115Nm[1] Sensitivity (±15 %) (output at rated capacity)2.5mV/V2.5 mV/V[1][2] Non-Linearity≤0.05 % FS≤0.05 %FS[2] Hysteresis≤0.05 % FS≤0.05 %FS[2] Non-Repeatability≤0.03 % FS≤0.03 %FS[2] ENVIRONMENTALOverload Limit3000 in-lb340 Nm
Temperature Range (Operating)-65 to 225 °F-54 to 107 °C
Temperature Range (Compensated)+70 to +170 °F+21 to 77 °C
Temperature Effect on Output (Maximum)±0.002 %Reading/°F±0.0036%Reading/°C[3] Temperature Effect on Zero Balance(Maximum)±0.002 %FS/°F±0.0036 %FS/°C[2][3] ELECTRICALBridgeResistance350 Ohm350 Ohm[1] Excitation Fre kHz3.28kHz
Excitation Voltage2 to 10 VAC rms2 to 10 VAC rms[4] InsulationResistance>5000000 kohm>5000000 kohm
Zero Balance≤2 % FS≤2 % FS[2] Bridge Current (at 5 VAC)50 mA50mA
PHYSICALSize - Shaft Length9.56 in242.82 mm
Size - Housing Length8.25 in209.55 mm
Size - Housing Height6.00 in152.40 mm
Weight47 lb21.3 kg
MountingFlange w/ Splined ShaftFlange w/ SplinedShaft[5] Sensing ElementStrain GageStrain Gage
Housing MaterialBlack Oxided SteelBlack Oxided Steel
Shaft MaterialSteelSteel
Electrical ConnectorMS3102A-14S-5PMS3102A-14S-5P
Torsional Stiffness204000 in-lb/radian23000 N-m/radian
Rotating Inertia0.0052 in-lb sec20.0006 N-m sec2
Maximum Speed15000 RPM15000 RPM
All specifications are at room temperature unless otherwisespecified.
Supplied180-019A5-socket mating connector for Series 3100, 4100,4200 torque sensors(1)
8113-105ARelay activated precision shunt calibration module(1)
Optional Versions:
No optional versions