金屬表面移印油墨單組份金屬烤漆表面絲印油墨，無需烘烤，耐酒精擦拭不掉色；適用于多種金屬的烤漆表面、五金噴粉表面，墨層均勻，顏料分散性好，細度均勻，不干網，過網性、流平性良好，固化后對極性底材具有優異的附著力，涂膜具有較高的硬度及良好的耐水性、耐候性、耐化學藥品性。無需添加固化劑，溫度25℃，24小時可實干。印刷方便，可以絲印和移印！1. 油墨技術參考 粘度：5000-15000CPS（因溫度、顏色而異） 細度：5um↓ 附著力：5B優 自干：25℃時，24小時固化；烘干：60℃時，30分鐘固化 過網性能：200目-400目網紗（用金、銀、珠光粉調配之油墨除外） 稀釋劑：L-3E專用稀釋劑 涂覆面積：25-35㎡/㎏（測試以300目聚脂單絲感光膠、網版為標準）2. 油墨使用方法 根據需要可添加10-30％稀釋劑進行稀釋。受到污染的素材應在表面用去漬油清洗或擦拭，以利于印刷效果優異

Metal surface printing ink

Single component metal paint surface screen printing ink, noneed to bake, alcohol wiping without falling color; suitable for avariety of metal coating surface, hardware powder surface, inklayer uniform, good dispersion, fine fineness, non dry net, goodnetwork, good leveling, curing to polar bottom material withexcellent adhesion, coating film tool It has high hardness and goodwater resistance, weatherability and chemical resistance. It doesnot need to add curing agent, the temperature is 25 degrees, and 24hours can be dried. Printing is convenient, it can be printed andimprinted.

1. ink technology reference

Viscosity: 5000-15000CPS (vary in temperature and color)

Fineness: 5um

Adhesion: 5B excellent

Self drying: curing at 24 hours at 25 C; drying at 60 degrees,curing at 30 minutes.

Over net performance: 200 mesh -400 mesh gauze (except for inkmixed with gold, silver and pearlescent powder)

Diluent: L-3E special diluent

Coating area: 25-35 / L (test for 300 mesh polyestermonofilament photosensitive adhesive, screen version).

2. method of using ink

10-30% diluent can be added as needed to dilute.

Contaminated materials should be cleaned or wiped on the surfacewith oil to facilitate printing.