油墨特性：擁有和德國彩麗寶一樣的顏色，主要用于PP、PE、BOPP等材料上，具有高色澤、高色彩、高遮蓋力、高穩定性、耐酒精及耐磨擦之特點?！　∮∷ⅲ航z印移印均可。 　　表干及實干時間：表干時間自然揮發5-10分鐘；實干時間在24小時以內。　　稀釋及清洗：SV3慢干開油水、UVK1（移印開油水）同時可使用718洗網水清洗。 　　 　　測試方法（完全干燥后）：　　1、3m膠紙粘在畫有百格的油墨表面，45度角迅速拉起不脫油；　　2、純度99%的工業酒精，一千克砝碼用棉布包住在油墨表面，以水平力來回拉200次無脫色；　　3、耐磨：橡皮擦500g力水平來回擦500次。 　　 　　使用方法： 　　1、使用前應充分?jǐn)嚢?，用后隨時封閉；　　2、攪拌時加開油水10-15%，稀釋到印刷粘度； 　　3、網板塞網時可用洗網水清洗； 　　4、不得與其它類型油墨混合使用。 　　　　注意事項： 　　1、塑膠材料的外觀相似，但可能會是不同的材料，客戶需試印確定其符合要求后，再批量印刷；　　2、在移印過程中，如出現拉絲或散開，可適當加入一些慢干膏即可； 　　3、環境溫度過高，將會影響油墨原有質量；　　4、根據氣候變化，請遠離火源，陰暗環境下存放。 5、技術參考數見下表： 檢驗項目 檢驗結果 測試條件 油墨線度 ≤12um刮板細度計 干膜光澤 ≥65° 60°鏡面光澤計 干燥速度 表干 25℃×5-10min 或60℃×2-3min 實干25℃12Hr或60℃×10min 耐酒精性 無變化 500克力/cm2酒精棉200次來回 附著力 100/1001mm×1mm×100格3M膠紙剝離 耐酸性 無變化 浸泡5%HCI×24Hr 耐堿性 無變化 浸泡5%NaOH×24Hr 耐鹽性無變化 浸泡5%NaCI×24Hr 耐水性 無變化 浸泡20℃自來水×96Hr 耐磨性 不見底 500克/cm2負載含砂橡皮200來回耐熱性 無變化 80℃×12Hr Ink characteristics: have and Germany Cailitreasure the same color, is mainly used for PP, PE, BOPP and othermaterials, with a high color, high color, high covering power,alcohol resistant and wear resistance, high stability. Printing:silk screen printing can be. Table dry and work time: surface drytime natural volatile 5-10 minutes; work time within 24 hours.Dilution and cleaning: SV3 slow dry open water, UVK1(printing openwater) also can use 718 washing network water cleaning. Test method(completely dry): 1, 3M adhesive tape sticky ink surface adhesionin painting,45 degree angle pulled off the oil; 2, purity99% of industrial alcohol, using cotton bag in the surface of theink one kilogram weight to horizontal force and pull 200 timeswithout decolorization; 3, wear: the eraser 500g force level wipe500 times back and forth. Method of use: 1, before the use shouldbe fully mixing, use at any time after the closure; 2, mixing anadditional 10-15% in oil and water, diluted to printing viscosity;3, mesh plug mesh can be used when washing network water cleaning;4, shall not be mixed with other types of ink. The matters needingattention: 1, the plastic material of similar appearance, but maybe of different materials, customers need to try to determine itsre, and then bulk printing; 2, in the printing process,such as drawing or spread out,may be appropriate to add some slowdry paste can be; 3, the ambient temperature is too high, it willaffect the of the original ink; 4, according to the climatechange, please stay away from fire, stored in darkenvironment.