NADH全自動絕緣靴絕緣手套耐壓試驗裝置

NADH Comprehensive Automatic Insulated Withstand Test Device

設備別名

絕緣靴絕緣耐壓測試儀、絕緣手套耐壓試驗儀、絕緣靴絕緣手套絕緣測試、絕緣手套測試儀、絕緣耐壓測試儀

概述

本絕全自動電力安全工器具測試系統是按照電力公司關于頒發《電力安全工器具預防性試驗規程》(試行)的通知(國電發[2002]777號)和電網公司電力安全工作規程（變電部分）的要求的基礎上，聯合高校廈門理工學院研制生產，并獲得廈門市政府科技創新基金的資金支持。本產品各項指標均符合國標的要求?？梢园础峨娏Π踩て骶哳A(yù)防性試驗規程》要求對絕緣鞋、絕緣手套等安全工器具進行智能化絕緣耐壓試驗，絕緣靴及絕緣手套耐試驗周期為半年，試驗過程中不允許擊穿，同時絕緣靴絕緣絕緣手套泄漏電流不大于限定值。產品適用于所有與電力相關行業。

主要技術指標

電源輸入電壓

220V±10%     50Hz

控制箱輸出電壓

0-250V

控制箱輸出電流

25A

額定輸出電壓

50KV

額定輸出容量

5KVA

泄漏電流指示表頭量程

19.9mA

泄漏電流帶上脫扣系統后量程

≥12mA

電壓測量誤差

±1% +3個字

泄漏電流測量誤差

泄漏電流分辨率

0.01mA

數顯計時

9分鐘自由設定

環境溫度

-15℃-50℃

濕度

≤90%RH，不結露、儀器不閃爍

連續運行時間

≤30min間歇

控制箱外形尺寸

425mm×288mm×320mm

試驗機外型尺寸

300mm×700mm×600mm

控制箱重量（kg）

20

試驗機重量（kg）

10

被試品測量?jī)?nèi)容

 絕緣鞋、絕緣手套試驗。

功能特點

1. 儀器可以同時進行8只絕緣靴或絕緣手套的試驗，并測量每只試品的泄漏電流。

2. 絕緣鞋試驗采用里面放置小鋼珠的干式試驗方法，擺脫了傳統的往鞋子里灌水做試驗，試驗完畢后不易曬干的做法。

3. 測量電壓和測量電流采用高低壓相互對應實時比較，保證測量電壓電流值的準確性。

4. 高低壓分離，泄漏電流采用抗干擾無線傳輸技術傳輸回控制箱，極大的保護人身的安全。

5. 每路試品均具有分?jǐn)鄼C(jī)構，當任意一路擊穿時或超過設定泄漏電流值時，該路試品將自動脫離試驗，不影響其它試品進行試驗。

6.儀器采用大屏幕液晶漢字顯示，顯示信息量大，一屏同時顯示試驗電壓、8路高壓泄漏電流、萬年歷、計時時間等參數以及漢字提示內容。

7.采用高細度的步進電機控制調壓器升壓過程，全自動進行耐壓試驗。試驗開始后，儀器自動合閘以國標要求升壓速度自動升壓，到達預定電壓開始計時，并保持試驗電壓、計時到、自動降壓，到零后自動斷電，提示試驗結束，同時顯示各試品泄漏電流，并自動保存測試結果。

8. 絕緣靴試驗具有專用金屬接地托盤，絕緣手套試驗具有專用容器，便于操作。

9. 試驗變壓器變比自由設定，可以與客戶現有變壓器相互配套。

10. 具有過流保護功能。

One. Product introduction

NADH comprehensive mobile withstand voltage test bench isdesigned according to the national standard of the latest industrytest test e, safe and reliable, powerful function,convenient and simple maintenance, mainly for the variouselectrical appliances, electrical components, insulation materialsfor power regulation under the pressure of the dielectric strengthtest, to test products insulation level, found in the sample ofinsulation defects and measure the voltage of power to run therelevant departments, electrical appliances manufacturingenterprise, metallurgical, coal, electric railway relateddepartments, scientific research units, colleges, etc. need towithstand voltage test device of choice for products.

Two. Product features

1. Voltage, current, time, status information and informationand other data 4.7 large screen LCD display, the readings are clearand intuitive;

2. All English interface, the operation is simple and clear, canbe adapted to a variety of applications;

3. Touch button operation, all functions can be set through thebuttons, improves the safety and reliability of products;

4. The full digital calibration method, abandoned the oldpotentiometer adjustment, the scene is very convenient, easy tocontrol the accuracy of the control (this feature with passwordprotection);

5. Press directly set test transformer ratio (this feature ispassword protected), at different levels of voltage testerconnection, the application is flexible, truly a console with aplurality of transformers matched with;  

6. The status of the function, the entire English guidedoperation, even in the case of no specification can also be skilledmanipulation;

7. The test process, the screen has a flashing high pressuresymbols show that the time to remind the operator to pay attentionto safety;

8. Test results show that the function, can automaticallydetermine the test results (test or test failure), and can reliablyrecord the current, flashover or breakdown voltage;