MultiPlus-II GX 48/3000/35-32 48/3000/35-32 230V GX AU逆變器-緋色av日本高清在線觀看,東歐FREE性VIDEO巴西

The MultiPlus-II and ESS ( Energy Storage System) functionalityThe MultiPlus-II is a multifunctional inverter/charger with all thefeatures of the MultiPlus, plus an external current sensor optionwhich extends the PowerControl and PowerAssist function to 50A resp. 100A. The MultiPlus-II is ideally suited for professional marine,yachting, vehicle and land based off -grid applications. It alsohas built-in anti-islanding functionality, and an increasingly longlist of country approvals for ESS application. Several systemconfigurations are possible. F or more detailed information see theESS Design and configuration manual. The MultiPlus-II GX TheMultiPlus-II GX model integrates a MultiPlus-II inverter/chargerand a GX device with a 2x16 -character display and the VE.Can,VE.Direct, USB and Ethernet ports. PowerControl and PowerAssist -Boosting the capacity of a generator A maximum grid or generatorcurrent can be set. The MultiPlus-II will then take account ofother AC loads and use whatever is extra for battery charging, thuspreventing the generator from being overloaded (PowerControlfunction). PowerAssist takes the principle of PowerControl to afurther dimension. Where peak power is so often required only for alimited period, the MultiPlus-II will compensate for insufficientgenerator power with power from the battery. When the load reduces,the spare power is used to recharge the battery. Solar energy: ACpower is available even during a grid failure The MultiPlus-II canbe used in off grid as well as grid connected PV and otheralternative energy systems. It is compatible with both solar chargecontrollers and grid -tie inverters. Two AC Outputs The main ACoutput features no-break functionality. Upon grid disconnection theMultiPlus-II takes over the load supply in under 20ms, ensuringuninterrupted operation of computers and electronics. The second ACo utput is active only when grid power is available on the ACinput. Use this to connect non-critical loads that should notdeplete battery, e.g., water heater or air conditioner. Virtuallyunlimited power thank s to parallel and three-phase operation Up tosix units can operate in parallel to achieve higher power output.Six 48/5000/7 0 units, for example, will provide 25kW / 30kVAoutput power with 4 20A charging capacity. In addition to parallelconnection, three units of the same model can be configured forthree-phase output. But that’s not all: up to six sets of threeunits can be parallel connected for a 75kW / 90kVA inverter andmore than 1200A charging capacity. For parallel and three-phasesetups, you can create a multi -unit system with one GX unit andother non -GX units. Configuring, monitoring and control Settingscan be changed in a matter of minutes with the VictronConnect appor VEConfigure software (computer or laptop and MK3-USB interfaceneeded) or via the VRM portal. Use the MultiPlus-II GX or add aCerbo GX or Ekrano GX to a MultiPlus-II for local or remoteconnectivity . Operational data can be stored and displayed on ourVRM (Victron Remote Management) website, free of charge. Whenconnected to the int ernet, systems can be accessed remotely, andsettings can be changed. Other monitoring and control options areavailable as well, like the VictronConnect app together with aVE.Bus Smart dongle , a Battery Monitor or the Digital MultiControl Panel .