非離子聚丙烯酰胺 Nonionic Polyacrylamide 

產品特性Product Features

該產品是丙烯酰胺單體的均聚物，經造粒、干燥、粉碎而成，離子化程度低。產品外觀呈白色顆?；蚍勰┕腆w狀。絮凝性能受水pH值和鹽類波動的影響小。在酸性條件下優于陰離子型，絮凝強度比陰離子型高分子絮凝劑的強。

The product is the polymer of acryl amide monomer which formedafter granulation, drying and crushing , with low degree ofionization. The product appears white solid particles or powder.Flocculation performance is affected little by the fluctuation ofthe water pH and salt. It is better than anionic under acidcondition and flocculation strength is better than anionic polymerflocculants.

聚丙烯酰胺---制糖業的應用

聚丙烯酰胺可加速蔗汁中細粒子的下沉，促進過濾和提高濾液清澈度。

Polyacrylamide can accelerate the sinking of fine particles incane juice,promote filtration and improve tiltrate clarity.

聚丙烯酰胺---建材工業中的應用

聚丙烯酰胺可用作涂料增稠分散劑，鋸石板材冷卻劑及陶瓷粘接劑等。此外，聚丙烯酰胺還廣泛應用于陶瓷，化肥，油漆，涂料等行業。

Polyacrylamide can be used as a coating thickening dispersant,saw stone slab cooling agent and ceramic bonding agent, etc.Moreover, polyacrylamide is widely used in ceramic, fertilizers,paints, coatings and other industries.

電鍍污水處理藥劑選型：在后段處理要用聚丙烯酰胺配合無機絮凝劑來處理電鍍廢水，實踐證明用水解度比較高的陰離子聚丙烯酰胺效果比較突出，一般推薦水解度為25-30效果為佳。藥劑單耗電鍍污水處理預處理過程要用到聚合氯化鋁和陰離子聚丙烯酰胺，根據污水的濃度不同藥劑的添加量也不同，濃度越高添加量越大，建議加藥量約為30～100ppm（即0.03～0.1公斤/噸廢水）。