壓燙注意：

1、建議壓燙機發熱板用淺色汗布包起來，使發熱板發熱更均勻。

we suggest use lightcolor jersey fabric to cover the heating board, which can make thetemperature more uniform.

2、壓燙參考數據隨面料、壓燙機和工作環境的不同而改變。

parameter of printingshould be adjusted according to the fabric, the thermo printing andthe working condition.

3、大貨生產前務必調試好機器，牢度，彈性等各項性能達到所有要求后方可生產大貨，以免造成不必要的損失。

before the bulkmaking, must adjust the machine to meet all re, in thatcase any losses can be avoided.

4、壓燙時熨斗請勿接觸印花部位。

the ironcan’ttouch the printing when make the after finishing.

5、壓燙后如要進行任何測試，請先放36小時，36小時內不可進行任何測試。

any test should betaken 36 hours later after the print is pressed.

存放注意：

1、室溫之下10—35度 under the room temperature between 10—35c.

2、不要將轉印紙暴露于熱力和陽光下the transfer paper can't be exposed to the sun or any heater.

3、防潮，相對濕度不要高于70% keep away from moisture, relative humidity should below 70%

4、避免轉印紙存放于多層的環境，以免粘壞，空氣要流通。

don’t pile up thetransfer paper so high to avoid sticking together, maintain goodair circulation.

5、請盡快將燙嘜用于衣服上，保存時間不可多余2個月。pleasetransfer the labels asap. don’tkeep it more than 2 months!