溫馨提示:此價格為了方便做排名，并非Zui終價，我們根據機械配置，尺寸大小等因素綜合定價，情況不同，價格也不同。請與客服聯系再拍。
振動耐磨試驗機 tc-15(sm-1502)
三星指定專用指定專用的手機表面塗層耐磨擦試驗機. 用於測試手機之外殼耐磨性.
三星指定專用指定專用振動耐磨試驗機的詳細說明:
通過將產品放進彩色石子和藥水混合的特殊液體中,進行振動磨擦,測試產品的耐磨擦性能.
型號：trough vibrator tc-15(sm-1502)
主機：trough vibratortc-15(sm-1502)
（內置switch unit e51-0,65 和metering unit d1-4）
配套輔料：
1.綠色磨粒rkk 15p 2.黃色磨粒rkf 10k 3.測試藥水fc120
韓國三星振動耐磨試驗機
model : tc - 15 (sm - 1502)
first of all, thank you for buying one of ourmachines.
we are producing vibratory finishing machines,vibration applied machines, precision processing special machineswith our accumulated technology and thorough systems underour motto that we serve our customers with the best products
.
we would like to introduce, through this manual, howto properly use the machine, to perform its best function inoperation that our development and production team have made withtheir endeavors.
this manual will guide the users to understand thee, how to use in the best conditions, how to increaseproductivity, how to maintain the e in the very simpleway.
for anything that is not sufficiently described, pleasefeel free to contact our office, then we will supply with furtherinformation that we can do.
we hope this e will do a good role in yourbusiness, good luck!
from all the members of jin poong b.r. tech.
warranty
1.warraty period of this e is 1 year or 2000 hourswhichever comes first. and warranty period of the electrical partsis 6 months.
this is based on the normal operation,operator’s mistake or mishandlingof the e, excessive operation beyond its capability andfailure to maintain on time will release the warrantyobligation.
2. in any case that the user has changed the machine partsor corrected without any prior agreement, this warranty will beinvalid..
painting durability testermachine model : tc - 15 (sm - 1502)
i. composition of the e
1. vibratory tumbler
2. sound cover
3. auto water & compound supply system
4. control unit
ii. specification of the e
1. vibratory tumbler
tub interior dimension: w180mm xl530mm
in-put area dimension: w130mm xl530mm
lining : hot pour polyurethane casting,thickness: 15mm
motor : 220v x 1hp x 3ph x 60hz. (2pole)
motor r.p.m : 3500
2. sound cover
l920mm x w620mm x h900mm+120mm
top door with gas cylinder
3. auto water & compound supply system
water tank, metered to be 500ml
water tank, metered to be 1000ml + addition ofcompound 200ml
water tank, metered to be 500ml + addition ofcompound 20ml
compound metering pump 300ml/min, adjusted to supply200 ml by a timer.
compound metering pump 20ml/min, adjusted to supply20 ml by a timer.
iii. utility re
1 electrical power: 220v x 1ph(20a).
2 tap water: 4l/hr. (to be linked to the rightside of the control unit by 8mm hose.)
iv. installation
just place on the flatconcrete floor without any anchoring.
in case the e is not horizontally leveled, the massin the tumbler can move to a side,
please be careful.
please link 3 wires from the motor to the u.v.w.terminal in the control box.
please link 2 wires from the main source ofelectrical power to the r.t. terminal in the box.
please link tap water to thesupply valve on the right side of the control box by 8mmhose.
in case tap water contains some foreignsubstance, please install pre-filter before thishose.
please link a hose(20mm) from the hosenipple on left side of the control box to the mainmachine.
a little longer hose is shipped with machine,please cut it off and adjust depending on
the site allocation
please link the discharge valve on the rear side ofmachine to the laboratory discharge pipe line.
please leave the discharge valve always open exceptfor the maintenance.
a compound container needs to be placed in the roomunder the control box.
please remove the top lid and place the container inthe room and put a separate lid pre-drilled
on 3 places, 1 big hole in the center and 2 small holes onthe right and left.
on the center hole, please place a level sensor whichemit alarm when there is not enough
compound in the container,
and on the right and left holes insert 2 hoses that comefrom the metering pumps.
v. operation
supply the control box with power (put the breakerswitch on, put the disconnect switch on) and
put the selector switch on, then you will have light on thepower lamp.
fill the vibratory tumbler with media 15l (11.25l ofcone and 3.75l of pyramid).
put the mode to manu and push on start.
if the mass turns from front to back, the motor directionis correct.
in case it turns in the opposite direction please correctby changing the wire.
1. preparationcourse
the media contains some flashes and burrs. this course is,prior to the main course of testing,
to condition the media by tumbling to the right purpose ofthe testing.
first of all, put mode to manu and push on prewater-1, then 500ml tank will be filled with water.
pls push on only once, if you push on twice it willbe stopped.
once it is full, it will be automaticallydisconnected. when the water is evacuated, the tank
is automatically refilled, therefore from next time,there is no need to put to manu and fill again.
.
set the timer 4 hours or 10 hours as required by yourcompany (currently designated to be 10 hours).
put mode to pre and push on start then the tumblerwill start to run and 2000 ml of water
will be supplied automatically.(4 times of500ml)
東莞東洋機械有限公司專業生產：
材料試驗機、耐磨試驗機、落球沖擊試驗機、插拔力試驗機、扭力試驗機、筆記本轉軸壽命試驗機、lcd前后搖擺試驗機、按鍵壽命試驗機、手機翻蓋滑蓋試驗機、觸摸屏點擊劃線試驗機、手機軟壓試驗機、手機跌落、破裂強度、紙箱抗壓試驗機、破裂強度試驗機、單/雙臂跌落試驗機、線材搖擺機（180度、360度、540度、720度等）、電線耐磨試驗機、曲折.突拉試驗機、滾筒跌落試驗機、線材伸長率、聽筒線伸縮疲勞試驗機、擺錘沖擊、杜邦沖擊、水平垂直燃燒試驗機、針焰試驗機、灼熱絲試驗機等。
冷熱沖擊試驗箱、可程序恒溫恒濕箱、精密烤箱、老化箱、鹽霧試驗箱、高低溫試驗箱、標準光源箱、quv老化試驗箱、防水試驗箱、砂塵試驗箱、氙燈耐氣候試驗箱、換氣式老化箱、高溫老化箱、蒸汽老化箱、低溫冷撓試驗箱等。
電子通用測試儀器、投影儀、2.5次元、三次元、顯微鏡等。
承接各種不規格非標試驗設備及儀器等。
公司簡介
東莞市東洋(中國)機械有限公司創建于 2003年，隸屬于中國臺灣東洋集團的下屬控投子公司，是一家集研發、設計、生產為一體的高新技術企業，公司擁有雄厚的技術實力，以卓越的設計能力，完備的工藝控制和完善可靠的檢測手段，向用戶提供高性價比的檢測設備。主要產品有：拉力機，拉力試驗機,材料試驗機,恒溫恒濕試驗機,恒溫恒濕試驗箱 等 200多種檢測試驗設備。產品精致美觀、穩定可靠，贏得了廣大用戶的贊譽，已廣泛應用于電子電腦，家用電器，工廠企業實驗室以及其它電氣制造企業，紙品，家私，玩具，五金等行業，為用戶的品質管理起著重要的作用。
本廠具有多年的生產經驗、硬件、軟件開發能力及機械設計研發能力，擁有一支強大技術研發人才隊伍，具有豐富的經驗、過硬的技術、開闊的思路和創新的能力。產品符合gb 、 iso 、 bs 、 astm 、 din 、 ul 、 en 、 csa 、 jis 、 ista 等測試標準。
聯系地址：廣東省東莞市萬江新和管理區新華南路62號
聯系電話：謝生: ;譚小姐:;0769-23291030
傳真號碼：0769-84562885
郵@163.com [email protected]
騰訊qq：謝生:9848612 李生:83271333;譚小姐:2418808202
阿里旺旺：toyomach;dgph17
詳細資料請登陸：https://www.shiyanji8.com
https://www.toyomach.com
服務
本產品的加工定制是否，品牌是其他，型號是TC-15，測量范圍是5mm，磨擦頻率是3000rm，測量行程是5mm（mm），機臺尺寸是W180mmxL530mm（mm）