mt-6500 lanyard printing machine technicalparameters

電壓voltage:380v.

功率gross: 9kw

溫度范圍temperature range: 0-399℃

時間范圍time range: 0-999sec.

工作臺尺寸worktable size:60x400cm    

滾筒速度rotation speed :1.-3.5 meter／minute

包裝尺寸package size: 60x90x135cm

重量weight :400kg

1溫度性能

temperature control performance

   mt-6500型織帶印花機恒溫采用Zui先進控制系統、控制方式:采用微電腦pid模糊運算控制方式,可根椐外部的環境及，設備的類型來自動設置其內部參數,使其達到值?？刂凭?可達正負0.2度，時間全數字化顯示，恒溫效果好，使用壽命:設計使用壽命為10年。

mt -6500 lanyard printing machine adopt the mostadvanced temperature control system which is fuzzy operated bymicroprocessor pid so that it can be automatically set internalparameters based on external environment and the type of device toget best performance. high precision (±0.5 ℃); digital display oftime, constant temperature, performance life: desired to 10years.

特點：周邊發熱，升溫快。油衡溫，連續轉印無色差

features: around heating, heating up fast, steadyoil temperature, continuous printing without chromaticaberration.

2變頻器性能、特征：

converter performance and features

mt-6500型織帶印花機采用先進的控制方式實現了高轉矩、高精度、寬調速驅動，能夠滿足各種織帶，松緊帶，緞帶，雪絲帶等要求的印花數度。通過空間電壓矢量pwm控制和無速度傳感器矢量控制技術及電磁兼容性整體設計，滿足客戶對適用場所的大轉矩低噪音、低電磁干擾的環保要求。

mt -6500 lanyard printing machine adopt theadvanced control system to achieve high torque, high precision andwide-speed drive, will meet the printing speed re of avariety of lanyard, elastic band, ribbon, snow ribbon and so on. itis control through space voltage vector pwm, speed sensor lessvector control and the overall design of electromagneticcompatibility to meet environmental re of high tor low noise and low electromagnetic interferences.

1.采用空間電壓矢量pwm控制和無速度傳感器矢量控制;

space voltage vector pwm and speed sensor lessvector control

2. 1hz時150%額定轉矩；;

1hz, 15% rated torque

3.功能完善、體積小巧，適合各種現場配套使用；

functional integrity, compact, suitable forsupporting all occasions.

4.具有自動穩壓（avr）和自動限流功能，系統更加穩定；

more stable with acr and automatic current limitfunction

5.內置pid控制器，可實現恒壓“一拖多臺”控制（選配功能)

multi-split with constant voltage achieved bybuilt-in pid controller (optional )

6.多達16段速控制及簡便易用的紡織擺頻功能讓應用更加得心應手；

up to 16 multi-speed control and user-friendlytextile wobble frequency make it with high proficiency.

7. 0~20khz的脈沖輸入輸出接口，方便組成數字化的閉環控制系統；

pulse input & output interface of 0-20khz isconvenient to form digital closed-loop control system

8.可內置rs485通訊接口，輕松實現集中控制和主從連動控制。

   it can be set a build-in rs485communication interface to achieve centralized control andmaster-slave coordinated control.

性能特征：運作穩定，產品印出來不會有模糊不清，能滿足客戶的各各要求從而大大的降低啦客戶的成本。

features: stable operation, clear print, greatlyreduce the cost of customer.

3定位系統

position system：

1）材料定位系統

mt-6500型織帶印花機采用垂直三重定位，對位準，整卷，多條同時轉印速度快，效益高！【適用于：各種手機掛帶，鞋帶，腰帶，松緊帶，，雪絲帶，商標等產品的轉印】

material positioning system:

mt-6500lanyardprinting machine adopts triplevertical positioning system. accurate positioning, entire roll,high speed of more than one rolls printing simultaneously, highprofits.

( suitable for printing all kinds of mobilelanyard, shoelace, belt , elastic, snow ribbon and label )

2）轉印紙定位系統

mt -6500型織帶印花機采用氣脹軸加脹力調節器特點：

軸主體采用優質鋼管，表面鍍鉻，鋁制凸鍵伸縮靈活；配置優質橡膠內膽與快速充排氣氣嘴，密封效果好，使用壽命長，可拆卸軸頭，維修方便。充氣后單邊膨脹高度可達5mm至6mm，比如膨脹前直徑為74mm至75mm，膨脹后直徑可達79mm至82mm，特殊膨脹高度，另行要求。3英寸鍵式氣脹軸，通常使用卷管內徑76mm?？蓾M足客戶印刷面積不受限制收放卷軸、能有效提高工效。

特征：在印刷過程中印花紙才不會左右偏移，原始的要幾個人操作有啦以上2個定位系統現在只需要1個人就可以操作啦。印刷速度也有所提高.

  transfer printing paper positioningsystem:

mt -6500 lanyard printing machine adopts air shaftsincreasing expansion force conditioner.

main body of axis is made by high steeltube, coated by chrome on surface. scalable and flexible aluminumcam key; high- rubber internal bladder; quick charge andexhaust gas nipple; good sealing effect; long serviceable life;dismountable axle housing convenient to repair. the expansionheight of single side could be 5mm-6mm after being inflatable. forexample, if its diameter was 74mm-75mm, after be inflatable itwould be 79mm-82mm. special expansion height should be re 3-inch button style air shafts; 76mm usually insidediameter; it can meet the different re of printing area,and highly improve efficiency.

features: printing paper will not shift around inprinting process. old model machine needs several workers tooperate, but our machine needs only one worker with two positioningsystem mentioned above. printing speed has been improved also.

4        毛毯校正系統

blanket correction system:

mt-6500毯帶脫離式,毛毯采用同步調節，并且?guī)в袎毫ζ胶鈼U，確保每次毛毯和加熱筒壓力一致，徹底解決啦在關機或停電時毛毯降溫的問題，更好的保護毛毯帶。

mt -6500 separation formula blanket, blankets adoptsynchronous adjustment system and pressure balance bar to ensurethat the blankets got the same pressure as the heating roller.ue which provide better protection of blankets completelysolved the cooling problem of blankets when the machine shut downor power failure happened.

 東莞華錦實業有限公司位于中國的制造業之都------東莞市厚街區，是一家從事熱轉印Zui早、經驗豐富、技術Zui先進、信譽的，集研發、生產、銷售為一體的專業性熱轉印機械生產廠商。企業榮獲了政府授予的“廣東省商標”、“民營科技企業”、“員工滿意企業”、“重合同守信用企業”等一系列榮譽。公司先后通過了“國際質量iso9001”，“國際環境iso14001”等管理體系認證和歐盟品質體系“ce”認證，并擁有多項技術專利，科技成果和技術指標均居于業內領先水平。

 多年以來，為了更好的完善公司體系、滿足客戶的需求、公司分別設立織帶印花加工、印花技術培訓、印花機械設備等研發中心?？筛鶕?jù)每位客戶的使用要求，提供Zui專業的印花計劃方案及全套生產工藝，以滿足每位客戶的需求。幾年來經過全體員工不懈的努力，華錦已經成為織帶印花行業內專業的制造廠商之一。設備廣泛應用于產品適合于服裝、手袋、雨傘、鞋、帽、工藝品、廣告用品、織帶等領域。

  公司擁有1000多平方米的現代化自置廠房，強大的技術力量及先進的加工設備，使公司擁有了加工制造能力，確保按時保質向客戶交付設備。

  我們始終堅持“以品質為資本，以不斷學習創新為生命力，以顧客滿意為宗旨”

的經營理念。將會以更高的質量，更完善的售前和售后服務來回饋客戶對我們長期的支持與信任，我們誠邀客戶親臨華錦。