profile and roughnesstester
產品簡介brief：
jb-5c/6c輪廓粗糙度測試儀是二合為一的精密測量?jī)x器，廣泛應用于機械加工、汽車、軸承、機床、摸具、精密五金、光學加工等行業。儀器驅動箱提供了行程為100、120、150毫米不同規格的高精度直線基準導軌，傳感器沿導軌作直線運動，位移量采用精密光柵位移傳感器進行數據采集。從而建立x坐標測量單位，在z軸方向采用從10mm至20mm兩種規格差動式電感傳感器，驅動箱可通過水平調節鈕作±10度的水平調整，并可分別通過控制箱的操作鍵或軟件界面進行水平和垂直方向的移動，對于采樣形狀可以任意按比例放大，儀器帶有電腦及專用測量軟件，在windowsxp操作系統下的測量軟件操作直觀方便，功能豐富，精度高，穩定性好，并方便打印輸出和文件保存。
可測量各種精密機械零件的粗糙度和輪廓形狀參數。用擬合法可評定半徑、角度處理，圓處理，點線處理，兩圓中心距角度、距離等。從而可測量直線度、凸度、溝心距、傾斜度、槽深，槽寬，溝邊距，溝心距垂直距離、水平距離、臺階等形狀參數。
此款儀器已可同國外進口儀器性能相比，各方面指標已達到，儀器符合國家標準gb/t3505-2000,gb/t6062-2001, gb/t10610-1998, 以及iso5436,iso11562,iso4287的要求。詳細指標見技術參數。
it is widely used in metrological departments of industries ofautos, tools, bearings, patterns, and optics for measuring profileand roughness of precision parts. the drive box is e with astraight-line guide of high accuracy traveling up to 100 mm. thedisplacement of the transducer moving along the guide collectedwith a precision grating system. the transducer is operated witheither keys on the control box or the buttons on the windowinterface. the jb-5c software runs on windows xp.
it is used to measure the form and roughness of profiles ofprecision parts. in addition to roughness, by fitting least-s of nominal form, a variety of form parameters can be measured,such as radius, angle, straightness, convexity, vertical andhorizontal distance, and distances between points, circles, andslots.

技術規格 mainspecifications