wika pcs緊湊型壓力開關 ip65 ped證書 測量相對壓力 差壓和溫度

compact pressureswitch
ip 65 model pcs

compact pressureswitch model pcs

  applications

    pressure monitoringand direct switching of electrical loads
    for measuring points with limited space
    for gaseous and liquid, aggressive andhighly viscous or contaminated media, also in aggressiveambience
    process industry: chemical/petro-chemical, on-and offshore, technical gases, environmental technology, achinebuilding and general plant construction, water treatment,pharmaceutical industry

    specialfeatures
    ingress protection ip65, nema 4
    ambient temperature -40 ... +85 °c
    1 switch point, spdt or dpdt with a high contactrating of up to 15 a / ac 220 v
    setting ranges from 200 mbar, max. test pressureup to 250 bar

   description
    thesehigh- pressure switches have been specifically developed forsafety-critical applications with limited space.
    high and product manufacturing to iso9001:2000 ensures reliable monitoring of your plant. in production,the switches are traced by assurance software at every stepand subse are 100 % tested.
    the gauge adapters are made of stainlesssteel, the diaphragm is, depending on the measuring range and thesensor code, made of inconel or coated with nbr or ptfe.
    each switch family is available in ip 65, ex-iaor ex-d versions (ex-d see model pca, data sheet pv33.31).in order to ensure asflexible operation as possible, the pressure switches are e micro switches, which
make it possible to switch an electrical load of up to 15 a / ac220 v directly. for smaller contact ratings, such as for plcapplications, argon gas filled micro switches with gold-platedcontacts can be selected as an option. for
two separate circuits the switches are also available in theversion dpdt (double change-over contact).

    byusing a diaphragm with an antagonist spring, themodelpcs pressure switch isextremely robust and guaranteesoptimal operating characteristics. 

   switch points
    the switch points canbe set to your re, free-ofcharge.
    please specify:
    switch point, switching direction (e.g. switchpoint: 0.5 bar,falling)

    after unscrewing the case cover, switch pointadjustment can be made using the adjustment screw. the switch pointis settable within the entire measuring range with the followinggeneral rule:
    define the value a = 2x repeatability +switch hysteresis
    if the pressure is rising, the switch pointshould be set between (min. + value a) up to max. of the settingrange.
    if the pressure is falling, the switchpoint should be set between min. up to (max. - value a) of thesetting range.

    example:
   setting range: 0 ... 1 bar with one switch contact
    repeatability: 1 % of 1 bar = 10 mbar
    switch hysteresis = 15 mbar (see table settingranges)
    value a = 2 x 10 mbar + 15 mbar = 35 mbar
    if the pressure is rising, the switch pointshould be set between 35 mbar up to 1 bar.
    if the pressure is falling, the switch pointshould be set between 0 up to 965 mbar.
    for optimal performance we suggest theswitch point lies between 25 % and 75 % of the settingrange.

    electricalconnection
    ? npt female, cableconnection using internal terminal block, ground connection usinginternal and external screw, max. ground cable cross-section 4mm2

    pressure switch certifiedper:
    pressure e directive97/23/ec (ped, annex 1, category iv, safety accessories, module b +d)
     low voltage directive 73/23 eec and 93/68eec dielectric strength safety class i (en 61298-2:1997-06)

    dielectricstrength
     safety class i (en61298-2: 1997-06)

    mounting
      direct or wallmounting
      preferred connection location of theprocess connection
 hould be below. alternatively the instrument can be installedso that access to internals is from front of the enclosure and theelectrical connection is placed on side.

    weight
    approx.1.0 kg

     options

    other processconnection, also with adapter
    case made of stainless steel 316
    electrical connection 3/4 npt, g 1/2 or m20 x1.5 (female)
    cable gland on request
    2" pipe-mounting kit (with clamping element)
    version for off-shore 5) 6) or tropicalisedapplication 5)
    version for applications to nace 5) 6)
    version for ammonia applications 6)
    oil and grease free version for oxygenapplications
    version to

        gas ex-ia dustex-iad gr. ii cat. 1 gd 6)
        electricalcharacteristics: ui = 30 v
                               i = 100 ma
                                pi= 0.75 w
                               ci = 0 μf
                               li = 0 mh
     accessories:
     - pressure gauge valves model 910.11,see data sheet ac 09.02
     - barstock valves model 910.81, see datasheet ac 09.18

     5) not in connection with sensor codev
     6) inert gas filleduired

     approvals andcertificates
      sil 2version 6)
      gost-r certificate
      test certificate *ca* (confirmationof the switchin

accuracy)
       test report *cp* (3-timelisting of the switch point, requires switch pointspecification)
       material certificate 3.1 peren 10204

   ordering information
   model / case / sensorcode / switch contacts with version / setting range / processconnection / electrical connection / switch point / switchingdirection / options
   example: pcs 2 m1 - 4/25 bar - 1/4"npt-f -1/2"npt-f

歡迎致電咨詢訂購wikapcs 緊湊型壓力開關 ip65 ped證書 測量相對壓力 差壓和溫度d區100mbar

電話:010-51669912 56291930

傳真：010-51669912

115 2636968574

郵箱：[email protected]

公司官網：https://www.zoriver.cn            https://www.zoriver.com.cn

本產品的品牌是WIKA/威卡，型號是PCS，類型是電子壓力開關，額定電壓是220（V），額定電流是15（A），機械壽命是100（萬次），Zui大工作壓力是100bar（Pa），產品認證是PED證書，加工定制是是