●SN三螺桿泵特點：SN three screw pump features:
1.轉子液壓平衡，振動小，噪音低。1. The rotor of the hydraulic balance, littlevibration, low noise.
2.輸出穩定，無脈動。2. The output is stable, no pulsation.
3.高效率。3. High efficiency.
4.具有很強的自吸能力。4. Has a strong self-priming capacity.
5.零部件采用通用性強的系列化設計，具有多種安裝方式。5. Parts versatility of seriationdesign, with a variety of installation.
6.結構緊湊，體積小，重量輕，可在較高轉速下工作。6. Compact structure, small volume, lightweight, can work under high rotation speed.

●SN三螺桿泵輸送介質種類：Low SN three screw pump transmission mediumtype:
　a. 潤滑性液體：如機械油，滑油，重油，渣油A. lubricate liquid, such as machine oil,lubricating oil, heavy oil, residual oil
　b. 低潤滑性液體：如輕柴油，重柴油，含蠟稀油B. lower lubricity liquid, such as lightdiesel oil, heavy diesel oil, wax containing thin oil
　c. 粘性液體：如各種合成橡膠液和人造膠液，乳化液C. viscous liquid, such as various kindsof synthetic rubber and synthetic rubber, emulsion

●SN三螺桿泵應用：Low SN three screw pump application:
　?在供熱設備中用做燃油，燃油供應和輸送泵。In heating e used as fuel, fuelsupply and transfer pump.
　?在機械工業中用做液壓，潤滑和搖控馬達泵。In the mechanical industry used as hydraulic,lubrication pump and the remote control motors.
　?在化學石油化工和食品工業中用做裝載，輸送和供液泵。In the chemical, petrochemical and foodindustries used as loading, transportation and feed li
　?在船舶上用做輸送、增壓、燃油噴射和潤滑油泵以及船用液壓裝置泵。On the ship, used for conveying,pressurization, fuel injection, and lubricating oil pump and Marinehydraulic gear pump.
三螺桿泵(SN三螺桿泵,sm三螺桿泵,spf三螺桿泵)選型時，要盡可能詳盡地了解泵的使用條件，除運行參數，如流量、壓力須要弄清楚之外，輸送的介質的特性如介質的腐蝕性，含氣量含固溶物的比率及固體顆粒的大小以及介質的工作溫度、粘度、比重對泵內過流元件的腐蝕性等和泵裝置的吸入條件，安裝條件均要了解。Three-screwpump (SN three screw pump, three screw pump, sm SPF three screwpump selection, should understand the using condition of pump asmuch detail as possible, in addition to the operating parameters,such as flow rate, pressure need to figure out, transmissioncharacteristics, such as corrosive medium, the medium of aircontent of solid solution and the ratio of the size of the solidparticles as well as the working temperature, medium viscosity,specific gravity within the pump flow components of corrosive andpump suction conditions, such as the installation conditions are tounderstand.
用戶可以填寫附在本樣本后的泵數據表，由廠家負責選型，也可以根據樣本按以下步驟自行選型。User can fill in theattached to this sample after pump data sheets, the manufacturershall be responsible for the selection, can also according to thesample, follow these steps to selection.
第一， 確定泵的轉速：（SN 系列螺桿泵的極限轉速為＜6000r.p.m）Determine the speed of thepump: (SN series screw pump limit speed for < 6000 r. p.)
1．螺桿泵轉速的選擇以輸送介質的粘度和泵的規格確定轉速范圍，一般輸送高粘度介質時，螺桿泵應選低轉速；若粘度低 ，相應選擇高轉速。Therotational speed of screw pump selection for medium viscosity anddetermine speed range of the specifications of the pump,transmission of high viscosity media in general, the screw pumpshould choose low speed;If the low viscosity, high speedaccordingly.
對于大規格的螺桿泵（主桿外徑∮60mm 以上）For the large size of screw pump (more than30 main stem diameter of 60 mm)

介質粘度γ＞20°E 時，轉速以970rpm 或720rpm 的螺桿泵。Medium viscosity gamma >20 ° E, screw pump speed to 970 RPM and 720 RPM.
若γ＞80°E 如粘膠液，轉速可選n=200~500rpm的螺桿泵If gamma > 80 ° E, such asviscose, of optional n = 200 ~ 500 RPM of the screw pump
對于小規格的螺桿泵（主桿外徑∮60mm 以下）：For small specifications of the screw pump(below 30 main stem diameter of 60 mm) :
γ＞20°E 時，n 選1450rpm 或970rpm的螺桿泵. Gamma > 20 ° E, n selected 1450RPM and 970 RPM of screw pump.
γ＞80°E 時，n 選300~600rpm的螺桿泵。Gamma > 80 ° E, n selected 300 ~ 600RPM of the screw pump.
2．由于螺桿泵的轉速愈高摩擦功率愈高，螺桿泵的磨損越大，壽命越短，如果輸送介質的潤滑性較差，或含有微量雜質，應選較低轉速，使泵保持較長的使用壽命。推薦n＜1450rpm。Frictiondue to the higher the rotational speed of screw pump power, thehigher the wear and tear of screw pump, the greater the shorterlife, if the medium of lubricity is poorer, or trace impurities,should choose a lower speed, to keep pump with long servicelife.The recommended n < 1450 RPM.
第二， 結構形式的選擇The choice of the form of structure
結構的選擇可根據螺桿泵的運行環境和安裝環境，選擇合適的安裝形式并遵循以下的原則：On the choice of structurebased on the operating conditions of a screw pump and theinstallation environment, choosing the appropriate type ofinstallation and follow the following principles:
1． 輸送潤滑性油類，且溫度T＜80℃時，選擇內置軸承結構的螺桿泵。1. Conveyor lubrication oil, andtemperature T < 80 ℃, choose built-in bearing structure of thescrew pump.
2． 輸送潤滑性較差，或溫度T＞80℃時，選擇外置軸承結構的螺桿泵。2. The conveyor lubrication ispoorer, or temperature T > 80 ℃, select external bearingstructure of the screw pump.
3． 輸送流動性差，粘度高的介質或?qū)λ斔徒橘|(zhì)進行加熱或保溫時，選雙層加熱泵體結構的螺桿泵。3. Conveyor illiquid,high viscosity of the medium or the transport medium for heating orthermal insulation, choose double screw pump heat pump bodystructure.
4． 輸送高溫介質時，應選擇耐高溫的材料制成的泵或局部冷卻的螺桿泵。4. High temperature medium, hightemperature resistant materials should be selected for the pump orcooling screw pump.
5． 關于螺桿泵的吸入能力可查閱樣本。5. About the screw pump suction capacity canrefer to the samples.
第三， 螺桿泵材料組合的選擇 見上表Third, the choice of the screw pump materialcombination See the table above
第四， 螺桿泵的吸上能力Fourth, the screw pump suction on ability
通過降低轉速或加熱降低介質黏度的方法，可達到高的吸上性能，見NPSHR 表By reducing the speed orheating medium viscosity reduction methods, can achieve high onabsorption performance, see the NPSHR table
第五，配套電機的選配Fifth, motor selection
螺桿泵的型號選定后，根據樣本數據，可查到泵的軸功率N，該軸功率再加上一定的功率儲備后，作為選配電機的依據，一般電機功率Nm不小于泵軸功率N 乘以功率儲備系數K 所得的值即：Nm≥K?N。K 值Screw pump model is selected,according to the sample data, the pump shaft power can be N, theshaft power plus the power of a certain reserve, as a basis for thematching machine, general motors power Nm not less than the pumpshaft power N times the power reserve coefficient K of the proceedsof the value, namely: the Nm acuity k. N.K value

輸送瀝青泵 NYP7-RU-T2-W11瀝青混合料專用泵 長春第二熱電有限公司
燃油噴射泵 SMH80R42E6.7W23三螺桿泵 暉春發電有限責任公司
船用低壓燃油泵 SMH80R42E6.7W23三螺桿泵 雞西熱電有限責任公司
輸送汽油泵 SMH80R42E6.7機械密封 佳木斯第二發電廠
高粘度乳液泵 NYP220B-RU-T1-W11高粘度液體齒輪泵 臺河第一電廠
燃料油供料泵 SMH80R46E6.7W23螺桿泵 江蘇徐塘發電有限公司
造船廠主機潤滑泵 SNF940R46U12.1W2三螺桿泵 安徽省淮北發電廠
輸送柴油泵 SNH120R46U12.1W23機械密封 安徽淮南洛能發電公司
瀝青加壓輸送泵 NYP3.6-RU-T1-W11高粘度抽料泵 安陽華祥電力有限公司
輸送乳油泵 SNH1300L46U12.1W2三螺桿泵 許昌龍崗發電有限公司
輸送原油泵 YCB10圓弧齒輪泵 華銀電力株洲發電廠
瀝青溶劑泵 SNH2200R42U12.1W2三螺桿泵 華銀株洲發電公司
輸送炭黑油泵 SNH2200R46E6.7W21三螺桿泵 金竹山電廠
輸送脂肪酸泵 SNH280R54E6.7W21泵頭 華銀金竹山火力發電
炭黑油輸送泵 KCB55齒輪泵 湘潭發電有限責任公司
輸送樹膠溶液泵 G40-1V-W110單螺桿泵 湖南省耒陽發電廠
輸送燃料油泵 SNH40R38U12.1W21三螺桿泵 灞橋熱電有限責任公司
輸送液壓油泵 SNH40R38U12.1W21三螺桿泵 灞橋熱電廠
輸送煉油泵 2CG5硬齒面渣油泵 陜西渭河發電廠
輸送粘合劑泵 SNH440R46E6.7W21三螺桿泵 陜西延安發電廠
倒油泵 W2.1ZK11M1W73雙螺桿泵 陜西韓城發電廠
輸送膠乳泵 SNH660L51U12.1W2三螺桿泵 永昌發電廠
鍋爐點火油泵 SNH80R46E6.7W21三螺桿泵 甘肅甘谷發電廠
輸送膠水泵 NYP110-RU-T1-W11高粘度泵 甘肅八0三發電廠
熱火裝置點火油泵 SNH80R46E6.7W21三螺桿泵 甘肅連城發電廠
桐油輸送泵 SNH80R46E6.7W21三螺桿泵 甘肅蘭西熱電有限公司
輸送潤滑油泵 SNH80R46E6.7W21三螺桿泵 廣西桂冠電力股份公司
輸送重油泵 SNH80R46E6.7W21三螺桿泵 桂冠大化水力發電總廠
渣油裝車泵 SNH940R46E6.7W21泵頭 廣西巖灘水電廠
輸送石油泵 SNS210R46U12.1W2立式三螺桿泵 陳村水力發電廠