相變儲能機組是以高性能相變材料為基礎的高新技術，解決了能量供求在時間和空間上不匹配的矛盾，有效提高了自然資源的利用率。

麥融高科采用相變材料相變溫度為15-25℃，采用三元多雙向換熱系統和儲能系統；結合先進的空氣處理技術和智能的控制策略，實現機房Zui大限度的節能。

based on phasechange material (pcm), phase change energy storage air handlingunit (pcesau) solves energy supply and demand mismatch in time andspace, which makes better use of natural source.

pcms used in thisunit have phase transition temperatures between 15 and25 oc. the materials are encapsulated in atriple-item, two-way heat exchanger. this heat exchanger isdesigned based on air handling and intelligent control technologiesto realize the largest energy savings.

 

工作原理 workprinciple

相變儲能機組工作時，無需配備制冷原件。在室內、外溫濕度滿足使用要求時，引入室外自然冷源，為環境降溫；在引入室外自然冷源的同時，將部分富余的冷量儲存在相變儲能材料中；當室外溫度升高，不滿足使用要求時，該設備可根據基站溫度需要，通過釋放所儲存的冷量為基站降溫，相對智能通風設備，可進一步提高自然冷源的利用效率，減少基站空調運行時長，提高節電率。

there is no needfor any cooling e when the pcesau is working. when outdoorair temperature and humidity satisfy the running re, it isdrawn into the conditioned space to cool down the indoor air. inaddition, the outdoor cold air is used to charge pcms. when outdoorair temperature is too high to use, the cold energy that has beenstored in pcms is released. comparing with fresh air unit, thisunit is able to make better use of natural source, shorten runningtime of existing air conditioner, and improve energysavings.

 

產品特性 productfeature

1、應用高性能相變儲能材料，提高自然冷源的利用效率，在機房停電時可作應急降溫；

2、采用多級過濾，延長維護周期，回風過濾后進一步改善室內空氣品質；

3、精準的溫濕度控制，工業級控制技術，系統穩定可靠；

4、采用下送風方式，極大的優化室內氣流組織；

1 it makes betteruse of natural cold source and can be used for temperature controlunder emergency conditions based on the application ofpcm.

2 it extendsmaintenance period and improves the indoor air throughmultilevel filters.

3 it makesmachines run more stably through its precise temperature andhumidity control and industrial controller.

4 it helpsimprove the indoor air distribution, because the cold air issupplied through its bottom part.

 

技術參數表technical parameter