一、關于AS/NZS3820（此處為簡寫，文末有原英文版祥細介紹）

也許你?？吹匠隹诘桨拇罄麃?新西蘭的產品要符合AS/NZS 3820:2020電氣安全認證

那么，什么是AS/NZS 3820:2020呢？

AS/NZS 3820:2020是電氣設備基本安全要求，

該標準為澳洲新西蘭所有電氣安全準則引用的基礎標準，

盡管不會依據該標準簽發證書，但是所有的證書簽發都以此標準為基礎，

3820要求所有電氣產品都是安全合規的，符合其相應的澳洲標準，

如果某項標準沒有澳洲偏差， 那么就參照IEC標準。

所有進入澳洲市場，功率為230/400V的電氣產品都必須符合AS/NZS 3820，

所有功率為230/400V的家用產品，現在都收到EESS的管制。

所有三級（EESS）以及強制認證類產品(REAS)都必須經由擁有JAS-ANZ資質的認證單位，或者ESV，新南威爾士NSW等政府單位進行認證。

二級產品(EESS)無須進行認證，但是澳大利亞的終端客戶往往會要求也對此類產品進行認證。

二、關于EESS

EESS為一系列規則的簡稱，全稱設備安全準則。

該準則被昆士蘭，維多利亞, 西澳以及塔斯馬尼亞的法律法規所引用。

EESS被除新南威爾士之外的所有州認可，新西蘭在某些條件下亦認可EESS。

這些州要求所有進口澳洲的低電壓（ 50-1000Vac,120-1500VDC）家用產品都必須標有RCM標記，并符合所有設備安全準備。

EESS也要求進口商確保對所有二級，三級產品進行注冊登記。

該要求自2018年開始就一直施行。

三、做澳洲認證需要哪些資料

1、申請表（申請人信息及產品信息）

2、銘牌（產品印字及參數）

3、產品說明書（包含電路圖）

4、產品關鍵部件表

5、樣品

四、澳洲認證辦理流程及周期（如下圖）

1、咨詢溝通

2、確認認證方案

3、簽訂合同

4、樣品測試

5、測試合格后出報告并申請證書

6、證書下發

7、售后服務

澳洲SAA/EESS認證周期：一般為從收到樣品起的35個工作日左右，如有需要，可以申請加急

五、澳洲認證費用

澳洲SAA/EESS認證費用跟產品以及產品適用的標準相關，需要提供具體的產品信息才能提供具體費用

以下附上澳洲EEESS官網上對AS/NZS3820的原文介紹：

Essential Safety Criteria

Legislation of participating jurisdictions in the EESS aims toensure electrical e manufactured or imported into Australiais electrically safe.

Primary duties of care require a person conducting a business orundertaking to ensure the business is conducted in a way that is“electrically safe.” This includes making sure the electricale used, designed, manufactured, imported and supplied isalso “electrically safe”.

“Electrically safe” for electrical e, for example, asdefined in legislation is:

The term “reasonable practicable” is structured on a riskmanagement. The term “reasonable practicable”, for example, in legislation is defined as:

(a) the likelihood of thehazard or the risk concerned happening;and

(b) the degree ofharm that might result from the hazard or therisk; and

(c) what the person concernedknows, or ought reasonably to know, about—

(i) the hazard or the risk; and

(ii) ways of eliminating or minimising the risk; and

(d) the availability and suitabilityof ways to eliminate orminimise the risk; and

(e) after assessing theextent of the risk and the available ways of eliminating orminimising the risk, the cost associated with available ways ofeliminating or minimising the risk, including whether the cost isgrossly disproportionate to the risk.

The joint Australian and New Zealand Standard AS/NZS3820 Essential safety re of electricale, is one part ofthe framework used by Electrical Safety RegulatoryAuthorities to ensure suppliers of electrical e are awareof the re to ensure e they supplyis electricallysafe and meets the safetycriteria. This applies to all electrical eirrespective of the Electrical E Safety System (EESS).

The re to meet the safety criteria is a starting point ofa supplier to ensure the e is electrically safe, however,it may not be everything a supplier will need to do. Suppliersshould address all the risks of the e to ensure iselectrically safe.

AS/NZS 3820 prescribesoutcome-orientated safetycriteria for electrical e. Compliance withthe safety criteria cangenerally be demonstrating by compliance to the relevant standards.However, AS/NZS 3820 acknowledges that suchcompliance with the safetycriteria may not be recognised if:

In relation to relevant standard, forexample, as defined in legislation is:

(1) The relevant standard for electrical e is—means:

(a) if there is a Standards Australia or joint StandardsAustralia and Standards New Zealand standard that appliesspecifically to the type—that standard together with AS/NZS3820(Essential safety re for electrical e);or

(b) if there is not a Standards Australia or joint StandardsAustralia and Standards New Zealand standard that appliesspecifically to the type and there is an IEC standard that appliesspecifically to the type—the IEC standard together with AS/NZS3820;or

(c) if neither paragraph (a) nor (b) applies—thenAS/NZS3820.

(2) In this section—

IEC standard means an International Electrotechnical Commissionstandard.

AS/NZS 3820 also indicates that at times, more thanone or more standards may apply to an item of e.Furthermore, claimed compliance to a relevant standard or standardsmay not be valid if the e is involved in incidents where ithas failed due to design or manufacturing failures, etc.

The supplier of electrical e should have sufficienttechnical documentation (it can be in the form of technicalconstruction/compliance file) that demonstrates the conformity ofthe electrical e to the re of AS/NZS3820. It must, as far as relevant for such an assessment,cover the design, manufacture and operation of the electricale, in English, and must include (but not limited to):

(a) a general description of the electrical e includingphotographs

(b) conceptual design and manufacturing drawings and schemes ofcomponents, subassemblies, circuits

(c) descriptions and explanations necessary for the understandingof said drawings and schemes and the operation of the electricale

(d) a list of the standards applied in full or in part, anddescriptions of the solutions adopted to satisfy the safety aspectsof this standard

(e) results of design calculations made, examinations carriedout

(f) test reports

(g) application and details of routine tests applied if any.

Note: The above safety criteria apply to all electrical eirrespective of the Electrical E Safety System(EESS). For In-Scope electricale additional re will apply that must be met priorto sale.

Specific product safety standards to achieve compliancewith AS/NZS 3820 can be purchasedfrom SAI Global.

Note: Applicants for acertificate may need to engage the services of a consultant (whomeets the definition of a Suitably Person in theE Safety Rules) to assist them in compiling appropriatedocuments required to make an application for certification. Thismay be necessary where the applicant for certification is not awareof the re or technical detail of information required tobe supplied to obtain a certificate.