超聲波測距儀 3007測距儀 工廠直銷
超聲波測距儀具有以下功能:
1.移動測距功能;
2.可自動計算面積與體積;
3.輕便,容易使用與攜帶;
4.準確到小數點后2位;
5.自動關機功能;6.低電顯示功能,測試距離為20m
包裝:雙面吸塑
規格:
電池:1個9v的電池。(不包括)
測量儀的單位是英尺和米。
度:0.005+1
頻率:40千赫
測量范圍:0.50到18.288米
cp-3007 ultrasonicdistance measurer owner’s manual
your measurer requires 9v battery(not supply) for power. for the best performance and life, werecommend alkaline battery.
follow these steps to install abattery.
caution: if you do not plan to use the measurer for amonth or more, remove the battery, batteries can leak chemicalsthat can destroy electronic parts.
stabilizing themeasurer
your measurer is sensitive tochanges in temperature and humidity. before you use the measurer,wait about 15~30 minutes for it to stabilize to the current room’stemperature.
turning the measureron/off
to turn on the measurer,pressmeasurer. the measurer turns itself off if nokey is pressed within about 1 minute.
taking a measurement
notes:
the measurement appears for about1 minute (or longer if you press another key)
error might appear if you try tomeasure a distance shorter than the range of 1.5 feet (0.45m) orlonger than 60 feet (18.288meters)
some type of curtains and blindscan absorb sound waves.
causing measurements to beinaccurate. if you are measuring distances in a room with curtains.open the curtains before measuring the distance to a window behindthem. also, be sure that the window is closed.
if there is not clear path betweenthe points where you are measuring. you might receive a falsereading from sound waves bouncing off objects such as chairs,tables and objects with uneven surfaces. if you are not sure if ameasurement is correct, move slightly to one side then measure thedistance again.
if the surface of a wall you aremeasuring is not sold and flat, or if you are measuring in a narrowcorridor. you might receive a false reading .if this happens, use asold surface to measure or move to the center of thecorridor.
to measure a distance longer than60 feet (18.288 meters) select a point in the middle of the room(for example) measure from the center of the room toward each side.then add the two measurements.
note: data of area orvolume can not be saved.
to find the volume of a room,measure the height. width and the length of the room and store eachmeasurement in a different memory location (see “saving ameasurement”). then pressvolume,the volumecalculation result appear.
follow these steps to find thearea of any two stored measurements
to have a laser pointer,presslaser. the laser pointer disappearsautomatically after about five seconds
you can light up the displayscreen with the “light” key for easy viewing, evenin a dimly lit area.
power 1x9v
unit of measurement feet ormeters
accuracy 0.5%+1 digit(8~60ft)
working frequency 40khz
working temperature 32” to 109.4”f(0” to 43” c)
range 1.5 to 60 ft (0.45 to180288m)
specifications are typical;individual units might vary.
specifications are subject tochange and improvement without notice.
caution:
the laser emitted from the unit isvisible laser of 650nm wavelength
don’t stare into the laser beamand also don’t shoot laser beam to any other’s eyes.
class ii laser product output <1 mw
notes:
the product has passeden60825-1
corresponding label is affixed onthe back of the unit.
+
本產品的類型是手持式測距儀,品牌是CAPITAL,型號是CP3007,測量范圍是20M,度是0.01(mm),工作電壓是9(V),重量是157(g),尺寸是18X18(mm),適用范圍是家用工業,加工定制是是
超聲波測距儀,胎壓計,車載發射器,IPOD配件 ; 音視頻采集卡 ; 數字角度尺 ; 電子溫濕度計
電子產品
深圳工展中心凱普特展銷部成立于二006年,是深圳凱普特科技負責國內銷售的主要窗口,深圳凱普特科技一直專注于汽車周邊電子產品及測試測量技術領域,形成了音視頻采集卡,超聲波測距,車載發射器,車載電源逆變器,交通安全,家用溫度計,酒精呼吸測試,噪音計等多個系列,同時公司R&D部可根據客戶技術要求設計開發。公司集多年豐富的生產經驗、制造工藝,品質管理于...