1. 高清晰的語音通信，麥克風（ mic ） 防噪音
2. 方便實用的耳機支架
3. 30 個 16 位來電號碼查閱
4. fsk 及 dtmf 來電顯示，自動檢測
5. 背光使用指示，來電振鈴時，背光燈閃爍指示
6. 來電鈴聲音量調節或關閉選擇
7. 智能通話閉音，并有指示燈指示
8. 來電手動和自動摘機選擇，并有指示燈指示
9. 錄音接口，可以將雙方的通話送到電腦的聲卡進行錄音，或接插監聽耳機
10. 無需外接電源，均可以使用
11. 黑色單機

主要功能   mainfunction 

鈴聲大小可調              ringervolume control

耳機、手柄受話音可調         headsetmicrophone and handle volume control

安裝方法及注意事項    fixing up method andattentions

1、使用前請先打開話機底部的電池蓋，按“+”“-”極性裝入電池，當顯示模糊時應及時更換電池。

please open the battery cover on the bottom ofdevice before using. put the battery inside according to the + -polarity. please replace the battery on time when the display isbecoming slur

2、必須向電信局申請開通來電顯示服務，本機才能正常接收來電信息

please apply for the display service at thetelecommunication office, then this device can receive  allincoming calls info normally

3、電話機應安裝在干燥、通風、無腐蝕氣體的地方. please fix the machinein the suitable place like  dry,aeration, no corrodent gas.

話機功能 ppf\\ob`phonf

見下圖  see picture asfollow

（圖）

1        來電指示燈——當有來電時，此燈會點亮； incoming call direct light--- the light will be on for incomingcall

2        工作指示燈——當在通話時，此燈會點亮；working direct light–the light will be on whencalling

3        數字鈕“1～#”；number button

4        液晶顯示屏——顯示相應的內容；lcdscreen -  display the related content

5        set鍵——按此鍵進入設置狀態；setkey–press thiskey for the setting

6        hold鍵——摘機狀態下，按此鍵進入音樂保留狀態，如果要進行通話，再按此鍵；  

hold key–under the state of picking up, it will keep themusic. if want to get through, then press the keyagain

7        flash鍵——按此鍵電話機會收線一次；

flash key- the device will hang up if press thiskey

8        redial鍵——按此鍵重撥剛才你所撥出去的號碼；redial key–pressthis key to redial the former phone no

9        on-hook鍵——此鍵按下表示摘機，此鍵彈出表示掛機；on-hookkey–on meanspicking up,

10     del鍵——按此鍵刪除你不要的內容或退出設置狀態；delkey- delete the content you don’t need or exit from thesetting.

11     out鍵——按此鍵查詢?nèi)ル娞柎a和通話時間；outkey–check thedialed calls and time

12     down鍵——按此鍵向前翻查來電號碼；downkey–check theincoming calls onwards

13     up鍵——按此鍵向后翻查來電號碼；upkey–check theincoming calls backwards

14     rec——錄音接口          rec–recordinterface

15     tel/line——外線接口     tel/line–exterior line interface

16     extension——分機接口    extension–extensioninterface

17     handset——手柄接口      handset–handleinterface

18     headset——耳機接口      handset–earphoneinterface

19     vol——耳機、手柄受話音音量調節，向“+”方向旋轉表示音量逐漸變大，向“-”方向旋轉表示音量逐漸變小；

 vol–earphone, handle volume control, + larger. -smaller

20     耳機、手柄開關切換——開關打到“”表示用耳機打電話，開關打到“ ” 表示用手柄打電話；

 earphone, handle swift--“ ”means calling byearphone. “ ”means calling by handle

21     flash時間調節——開關調至600，表示flash時間是600毫秒，開關調至300，表示flash時間為300毫秒，開關調至100，表示flash時間為100毫秒；flash time control- turn to 600, the flash time is 600 millisec.turn to 300.the flash time is 300 millisec. turn to 100, the flashtime is 100millisec

22     撥號方式開關——打到“t”表示音頻撥號，打到“p”表示脈沖撥號。dial swift–t:frequency dial. p :implusedial

23     鈴聲大小調節——打到“h”表示大檔，打到“l(fā)”表示小檔；ringvolume control- h hight. l less

24     mic——耳機、手柄發送大小調節，向“+”方向旋轉表示發送逐漸變大，向“-”方向旋轉表示發送逐漸變??；

  mic–earphone, handle sending control. + larger.–:smaller

25     摘掛機開關——推上去為“摘機”，推下來為“掛機”。on-off swift : on is picking up, off is hangingup

話機設置  phonesetting

設置方法   settingmethod

1、待機狀態下，按“set”鍵進入設置狀態。on standby, press set key tosetting

2、按“up”、“down”鍵改變設置項目和修改設置參數，某項設置完成后，按“set”鍵確認并進入下一個設置項目。

press up, down key to set the program andspecification. when finishing one setting, press set key forconfirm and move on for the next step

3、在設置過程中按“del”鍵退出設置狀態；during the setting, pressdel key back to the setting state

設置內容 content setting 

1、設置日期/時間：按“set”鍵液晶屏提示“set 1date”按“set”鍵確認進入日期/時間設置，年在閃爍，按“up”、“down”鍵進行修改后，按“set”鍵確認。進入月份設置，方法與年的設置相同。依次修改日、時、分的設置。

set date/time: press setkey,  the lcd screen will display “ set 1 date “, then pressset key to confirm, then enter the date time setting.  year isshining, press up and down key to adjust, then press set toconfirm. then to moth setting, same way as year setting. in turn todate, hour, and minutes setting

2、區號設置：液晶屏提示“set 2code”按“set”鍵確認，液晶屏顯示“code-----”，按“up”、“down”鍵修改第一位區號，完成后按“set”鍵進入第二位區號修改，以此類推。

code setting: lcd screenshows set 2 code, press set for confirm, screen shows code---,press up, down key to change the first digital code, then press setfor the second digital after finish the first step. and soon

備注：設置本地區號后，如本地來電有區號時會不顯示，以方便回撥。

remarks: after setting the local code, itwon’t displaythe code when incoming call from local for convenient to dialback.

3、出局碼設置：液晶屏提示“set 3 pcode”按“set”鍵確認，液晶屏顯示“pcode--”，按“up”、“down”鍵修改第一位出局碼，完成后按“set”鍵進入第二位出局碼修改，以此類推。

out code setting: thescreen shows set 3 pcode, press set key for confirm, screen showspcode---, press up down key to revise the first out code, afterfinishing, then press set for the second digital outcode.

  4、自動ip設置：液晶屏提示“set 4 auto ip”按“set”鍵確認，液晶屏顯示“auto ip  off”，按“up”、“down”鍵選擇自動ip開或關，選擇“auto  ip on”，按“set”鍵確認，液晶屏提示“inputcode”，此時根據不同電信公司ip服務的不同方式輸入特服號碼、卡號、密碼，輸入過程中，可用“del”鍵進行修改，輸入完畢按“set”鍵確認。

automatic ip setting: the screen shows set 4auto ip, press set key for confirm, screen shows auto ip off, pressup down key for choosing automatic ip on or off, choose auto ip on,press set for confirm, the screen shows input code, then accordingto the different way of ip service of different telecommunicationcompanies, input the service no, card no, code, during the processof inputting, it is possible to revise with del key. afterfinishing inputting, press set key for confirm.

操作說明 operating guide

來電號碼 incoming callsno

接收  receiving

當有來電顯示信息發送到本機，話機能自動識別來電制式，過濾掉本地或手機前的長途區號，并顯示到話機的屏幕上。Zui多可顯示12位來電號碼。

when incoming call info send to the device, themachine will automatically recognize e the callingmodel, 

來電查詢  check dialedcall

在待機狀態下，按“up”、“down”鍵查詢來電情況，按“up”鍵從Zui后一組向前查詢，按“down”鍵從第一組向后查詢。

onstandby, press up down key to check the incoming calls, press upkey is to check forward from the last one, press down key is tocheck backward from the first one.

去電號碼查詢  dialed phone numbercheck

待機狀態下，按“out”鍵，查詢?nèi)ル娞柎a（Zui多可顯示16位），及通話時間。

onstandby, press out key, check the dialed calls no. ( maximum 16digital) and the calling time

來、去電號碼刪除  incoming and dialed phone nodelete

在查詢到某組來電、去電號碼，可按“del”鍵，刪除本組號碼。按住“del”鍵3秒，可刪除全部來電號碼或去電號碼。when checking the incomingor dialed phone no, press del key to delete this no.  pressdel key for 3 seconds, it could delete all incoming or dialed phoneno.

hold鍵  hold key

在摘機狀態下，按“hold”鍵，則進入音樂保留狀態，并有音樂發送給對方，同時對方不能聽到你的聲音。若要重新通話，只要按“hold”鍵即可。

onthe state of picking up, if press hold key, it will keep the music,and meanwhile send the music to the other side, however, the otherside cannot hear your voice. if want to get through again, justpress the hold key

redial鍵   redialkey

1、在摘機狀態下按“redial”鍵，重撥前次所撥號碼（Zui大32位）。

on the state of picking up, to press the redialkey, it will redial the last dialed phone number (maximal32digital)

2、在掛機狀態預撥號后，按“redial”鍵，則自動摘機撥出預撥號碼。（若設置了出局碼，且預撥號碼大于或等于6位，則自動摘機撥出出局碼后延時3.6秒再撥出后面的號碼。）

on the state of hanging up, press redial key, itwill auto dial the phone no. (if setting out code, and the phone nois equal or more than 6 digital, it will auto pick up and dial theout code, after 3.6 seconds, it will dial thelatter.

3、掛機來電查詢狀態，按“redial”鍵，則自動摘機撥出顯示的號碼；連續按兩次“redial”鍵，則在來電號碼前自動加“0”回撥。（若設置了出局碼，當查詢到的來電號碼，按“redial”鍵，則自動摘機加撥“出局碼”并延時3.6秒后再撥出顯示的號碼；連續按兩次“redial”鍵，則在號碼前自動加撥“出局碼”+3.6秒+“0”。之后重撥也會自動加撥“出局碼”并延時3.6秒后再撥出顯示的號碼。）

on the state of hanging up & checking, pressredial key, it will auto pick up and dial the displayed  phoneno. if  press redial twice, it will auto dial out code +3.6seconds + 0.if redial,it will auto pick up and dial the outcode, after 3.6 seconds, it will dial thelatter.

4、摘機來電查詢狀態，按“redial”鍵，話機自動收線一次后撥出顯示的號碼。（若設置了出局碼，當查詢到的來電號碼，則加撥“出局碼”并延時3.6秒后再撥出顯示的號碼）

on the state of picking up and checking incomingcall, press redial key, the devie will hang up once, then dial thedisplayed phone no. (if setting out code, if checking the incomingcalls, it will auto pick up and dial the out code, after 3.6seconds, it will dial the displayed phone no).

5、掛機去電查詢狀態，按“redial”鍵，將自動摘機撥出顯示的號碼；摘機去電查詢狀態，按“redial”鍵，話機自動收線一次后撥出顯示的號碼。（若設置了出局碼，當查詢到的去電號碼首1～3位是出局碼時，回撥、重撥及追撥時撥完“出局碼”后延時3.6秒后再撥出顯示的號碼。）

on the state of checking dialed calls, presssredial key,it will auto pick up, and dial the displayed phone no.one the state of picking up and checking dialed call, press redialkey, the device will auto hang up once and then dial the displayedphone no; (if setting out code, when the 1-3 digital of the checkeddialed call is out code, dialed the out code, after 3.6 seconds, itwill re dial the displayed phone no when calling back, redialing,calling. 

flash鍵   flashkey

在摘機狀態按此鍵話機將自動收線(600/300/100毫秒可選).

inthe state of picking up, press flash key will hang up(600/300/100milli-sec available)

"話務電話機，話務耳機,前臺耳機,電話撥號器 電話耳機-我媽懷了我孩子怎么辦|激情亞洲AV在線一區二區三區メイリン モデルコレクション メ"的品牌為OEM