fanless atx power supply for industral pc, embedded system, max110w output
Fanless ATX power supply
for industral pc, embedded system
max 110w output

we provide enhance 110w version,  the following spec forstandard version, max outpu 60w (80w) information forreference.

==>> Compact MINI-ITX power supply Model: ATX_W03<<==

Power Supply Overview
1.1 Table 1 Input Electrical Characteristics Overview

Input voltage range: 90Vac to 264Vac
Normal voltage range: 100Vac to 240Vac
Frequency range: 47-63HZ
Max input ac current: 2.0Amax at full load condition
Inrush current (cold start): 40A typ peak,115Vac;60Atyp peak,230Vac
Efficiency: 85%(230Vac input full load )
Leakage Current: Less Than 3.5mA,230Vac input
Standby Power Loss: =<0.5W,230Vac input
Input Fuse: T2A/250Vac

1.2 Output Electrical Characteristics Overview
1.2.1 Table 2 Output Voltage ,Current & Regulation.

Output Voltage: +12V
Regulation: ±5%
Min. current: 0A
Rated current: 5A
Peak current: 6-8A

Note:* The peak current should be test at other of dc output atRated load ,And the peak current pulse width within 100ms.

1.2.2 Table 3 DC Output Ripple & Noise.
Output Voltage: +12V
Ripple &Noise(Max.): 120mVp-p
Note:
1) Measurements shall be made with an oscilloscope with 20MHzbandwidth.
2) Outputs shall be bypassed at the connector with a 0.1uF ceramiccapacitor and a 10uF electrolytic
capacitor to simulate system loading.

1.2.3 Output Transient Response
Note: Transient response measurements shall be made with a loadchanging repetition
rate of 50Hz to 10kHz

1.2.4 Table 5 DC Output Hold-Up Time
Output Voltage: +12V
110Vac input: >=10mS
230Vac input: >=10mS
Note: All of dc output at full load.

1.2.5 Table 6 DC Output Overshoot At Turn On & Turn Off
Output Channel: +12V
Output(V): +12V
Over shoot voltage (V): 5%(Turn on),5%(Turn off)
Note: All of dc output current from Min. to Max.

1.2.6 Table 7 Turn on delay
Output Voltage: +12V
120Vac input &Full Load: =<7000mS
220Vac input &Full Load: =<7000mS

1.3 Protection
1.3.1 Table 9 DC output Over Voltage Protection.
Output Voltage: +12V
Max .Over Voltage: 19V
Comments:
Note: The power supply shall be test at max AC voltage (264Vac) andmin load or no load.

1.3.2 Table 10 DC Output Over current Protection.
Output Voltage: +12V
Over current MAX: 9A
Comments: Hiccup

2.Isolation
2.1 Table 12
Input To Output: DC500V 15M min(at room temperature)
Input To FG: DC500V 15M min(at room temperatutre)
Output To FG: Annectent
2.2 Table 13
Input To Output: 1500Vac 50Hz 1 minute =<10mA
Input To FG: 1500Vac 50Hz 1 minute =<10mA
Output To FG: Annectent

3,Safety
The power supply shall compliance with the following Criterion:
1),UL60950
2),EN60950
3),GB4943-2001

4,EMC
4.1 EMI
The power supply shall compliance with the following Criteion
1),Conduction Emission
*EN55022,CLASS B
*GB9254-1998
*FCC ClassB

2),Radiated Emission
*EN55022,CLASS B
*GB9254-1998
*FCC Class B

4.2 EMS
The power supply shall compliance with the following Criterion
1),ESD
*GB/ICE61000-4-2 Level 3
2),EFT
*GB/ICE61000-4-4 Level 3
3),SURGE
*GB/IEC61000-4-5 Level 3
4),DIP
*GB/ICE61000-4-11 Class B/C

5,Environmental Requirement
5.1 Temperature
Operation: 0c,+40c
Store: -20c,+85c

5.2 Humidity
*Operating: from 10% to 90% relative humidity (non-condension)
*StoreL Fron 5% to 95% relative humidity (non-condensing)

5.3 Altutude
*Operating: to 10,000 ft
*Store: to 20,000 ft

5.4 Cooling Method
*Ventilation cooling

5.5,Vibration
*10-55Hz, 19.6m/s(2G), 3 minutes period, 20 minutes each along X,Yand Z axis

5.6,Impact
*49m/s(5G), 11ms, once each X,Y and Z axis

6,Dimension
*145mm x 32mm x 32mm

7,Weight
*(155+/-10g)

8,DC Output Cable Specifiction
UL1007# 4PIN TO 4PIN yellow-black

9,SIZE:
145x28.9mm

10,PHOTO