modular design for the complete tool series : - highlevel of common parts for low spare parts inventory and easymaintenancejaw assembly (patent pending) with jaws guided inindependant channels and pneumatic contact pressure : - long lifeduration - safe and secure gripping of the mandrels - one singlejaw assembly for all rivet dimensionsperformance : - high settingforce and low tool weight - faster working cycles - strokeoptimized for every tool typeeconomy :low compressed airconsumption through - same air for rivet setting and broken mandrelejection - switchable suction system through easy to activate slideswitchergonomics and safety : - rubber padded, hand friendly toolgrip - outstanding weight distribution - low vibration and noisedamping - low triggering force - mandrel container e withsafety device and adjustable airflow deflection - safety airpressure valve to avoid tool overstress through excessive airpressuretaurus series
pneumatic-hydraulic riveting tools

taurus 1
p/n 756 0001taurus 2
p/n 757 0007taurus 3
p/n 758 0002taurus 4
p/n 759 0001taurus1taurus2taurus3taurus4

working range:
up to 4mm ?alu/steel
weight:
1,3 kg
setting force (at 5 bar):
4.200 n
performance/weight ratio:
3.230 n/kg

operating air pressure:
5 to 7 bar
usable stroke:
15mm
air consumption:
approx. 1,0 litre per rivet
noise emission:
77 db
vibrations:
< 2,5 m/s2

workingrange:
up to 5mm? all materials and 6mm ? alu/steel
weight:
1,6 kg
setting force (at 5 bar):
9.000 n
performance/weight ratiot:
5.625 n/kg

operating air pressure:
5 to 7 bar
usable stroke:
18mm
air consumption:
approx. 2,3 litres per rivet
noise emission:
78 db
vibrations:
< 2,5 m/s2

workingrange:
up to 6,4mm ? all materials
weight:
1,9 kg
setting force (at 5 bar):
14.000 n
performance/weight ratio:
7.370 n/kg

operating air pressure:
5 to 7 bar
usable stroke:
25mm
air consumption:
approx 4,8 litres per rivet
noise emission:
79 db
vibrations:
< 2,5 m/s2

workingrange:
up to 6,4mm ? all materials, and 8mm alu
weight:
2,0 kg
setting force (at 5
bar):
20.000 n
performance/weight ratio:
10.000 n/kg

operating air
pressure:
5 to 7 bar
usable stroke:
19mm
air consumption:
approx 4,8 litres per
rivet
noise emission:
79 db
vibrations:
< 2,5 m/s2

nosepiece in
working position:
17/18
nosepieces in
tool base:
17/24 and 17/27
wrench sw 12/14
wrench sw 14/17
hydraulic oil 100 ml
oil filling containernosepiece in
working position:
17/27
nosepieces in
tool base:
17/29,17/32 and 17/36
wrench sw 12/14
wrench sw 14/17
hydraulic oil 100 ml
oil filling containernosepiece in
working position:
17/36
nosepieces in
tool base:
17/40 and 17/45
wrench sw 12/14
wrench sw 14/17
hydraulic oil 100 ml
oil filling containernosepiece in
working position:
17/36
nosepieces in
tool base:
17/40 and 17/45
wrench sw 12/14
wrench sw 14/17
hydraulic oil 100 ml
oil filling container

accessories to the taurus seriesextension units

1.purpose

the nose extension units are used to reach recessed rivetinglocations.two different lengthes are available for all taurus tools: a 50 mm (2“) extension and a 100 mm (4“) extension.

taurus 1nose extension unit 50 mm p/n: 756 2013taurus 1noseextension unit 100 mm p/n: 756 2015taurus 2nose extension unit 50mm p/n: 757 1016taurus 2nose extension unit 100 mm p/n: 7571019taurus 3nose extension unit 50 mm p/n: 758 1021taurus 3noseextension unit 100 mm p/n: 758 1023taurus 4nose extension unit 50mm p/n: 758 1021taurus 4nose extension unit 100 mm p/n: 75810231.designeach nose extension unit consists of 3 parts: ·50 mm or100 mm extended head·50 or 100 mm extended jaw pusher·50 or 100 mmcomplete transition pieceafter installation the total availablehead length is 106 mm (4,17”) with the 50 mm extension and 156 mm(6,17”) with the 100 mm extension, without any diameterincrease.2.installationthe nose extension units can be installedwithout any special tool, only with the wrench included in thepackage.3.spare partsall spare parts for the nose extension unitscan be ordered as follows :download product information in pdfformatswivel air supply line connector

p/n 756 1023

1.purpose and installationthe swivel air connector is used toincrease the freedom of movement of the tool around its air supplyline connection. two different installations are possible. (seealso the operating instructions).·on the rear air inlet:-unscrewthe hose with its fitting and sealing ring (parts 64 und 89)-screwthe swivel connector with sealing ring into place-screw the hosefitting with its sealing ring into the rear plug of the swivelconnector .·on the side air inlet: -unscrew the hose with itsfitting and sealing ring .-unscrew the safety valve with itssealing ring (parts 89;90)-proceed as above to install the swivelconnector and the air supply hose-screw the safety valve with istsealing ring into the rear air inlet.2. scope of deliverythecomplete swivel connector includes the swivel connector itself, aswell as its sealing ring.