型號：496粘合材料類型：塑料類、橡膠類、金屬類、其他材質、其他品牌：樂泰樹脂膠的分類：氰基丙烯酸甲酯剪切強度：25（MPa）有效物質≥：100（％）工作溫度：25（℃）保質期：21（個月）執行標準：COCCAS：NA典型黏度：125（cps）完全固化時間：24（h）

具體價格請來電洽談0755-86381816

樂泰496

包裝規格：20g瓶裝

主要粘貼材料：金屬，塑料，橡膠

顏色：無色

類型：甲基

粘度：100/150

固化速度：30秒/24小時

剪切強度：20/30

相對密度：1.1

remove affected person to freshair, and if still feeling unwell seek medical attention.
first aid - skin
do not pull bonded skin apart. it may be gently peeled apart usinga blunt object such as a spoon,
preferably after soaking in warm soapy water. cyanoacrylates giveoff heat on solidification. in rare
cases a large drop will generate enough heat to cause a burn. burnsshould be treated normally
after the adhesive has been removed from the skin.
if lips are accidentally stuck together apply warm water to thelips and encourage maximum wetting
and pressure from saliva inside the mouth. peel or roll lips apart.do not try to pull the lips apart
with direct opposing action.
first aid - eyes
if the eye is bonded closed, release eyelashes with warm water bycovering with wet pad.
cyanoacrylate will bond to eye protein causing lachrymatory effectwhich will help to debond
adhesive. keep eye covered until debonding is complete, usuallywithin 1-3 days. do not force eye
open. medical advice should be sought in case solid particles ofcyanoacrylate trapped behind the
eyelid cause any abrasive damage.
first aid - ingestion
ensure that breathing passages are not obstructed. the product willpolymerise immediately in the
mouth making it almost impossible to swallow. saliva will slowlyseparate the solidified product
from the mouth (several hours).

non flammable product (flash pointis greater than 80°c (cc)). if product is involved in fire
extinguish with dry powder, foam or carbon dioxide. trace amountsof toxic fumes may be released

5. fire fighting measures
on incineration and the use of breathing apparatus isrecommended.
6. accidental release measures
ventilate area. do not use cloths for mopping up. polymerise withwater and scrape off floor.
7. handling and storage
handling
ventilation (low level) is recommended when using large volumes.use of dispensing e is
recommended to minimise the risk of skin or eye contact.
storage
for optimum shelf life store in original containers underrefrigerated conditions at 2°c to 8°c.

8. exposure controls / personalprotection
occupational exposure limits
methyl cyanoacrylate hsa (1999) c.o.p : oel 2ppm (8mg/m3) 8htwa.
hsa (1999) c.o.p : oel 4ppm (16mg/m3) 15 min
exposure limit.
acgih: tlv 0.2ppm 8h twa.
polyethylene or polypropylene gloves are recommended when usinglarge volumes. do not use
pvc, rubber, nylon or cotton gloves. eye protection should be usedwhere there is any risk of
splashing.

9. physical and chemicalproperties
physical state liquid.
colour clear colourless.
odour sharp. characteristic.
ph not applicable.
boiling range/point (°c) boils above 100.
flash point (cc) (°c) exceeds 80.
specific gravity 1.1 at 20 °c.
solubility in water (kg/m3) immiscible.
solubility in acetone not applicable.
vapour pressure (mmhg
@25°c)
less than 0.5 at 25 °c.
explosion limits (%) not determined.
10. stability and reactivity
polymerisation will occur in the presence of moisture.
11. toxicological information
inhalation
irritating to respiratory system. in dry atmosphere with < 50%humidity, vapours may irritate the
eyes and respiratory system. prolonged exposure to highconcentrations of vapours may lead to
chronic effects in sensitive individuals.
skin
this product is classified as a skin irritant. bonds skin inseconds. considered to be of low11. toxicological information
toxicity: acute dermal ld50 (rabbit)>2000mg/kg. due topolymerisation at the skin surface
allergic reaction is not considered possible.
eyes
this product is an irritant to the eyes. liquid product will bondeyelids. in a dry atmosphere
(rh<50%) vapours may cause irritation and lachrymatoryeffect.
ingestion
cyanoacrylates are considered to have relatively low toxicity.acute oral ld50 is >5000mg/kg (rat).
it is almost impossible to swallow as it rapidly polymerises in themouth.

優勢方面

我們只提供原裝漢高樂泰、道康寧、3m、邁圖等產品，我們?yōu)閺V大客戶朋友提供極具競爭優勢的價格。

漢高樂泰是全球膠粘劑技術和品牌市場。

道康寧、邁圖是全球硅膠領域的市場。

3m是全球膠帶、環氧膠、結構膠等領域的市場。

我們是專業膠粘劑及施膠設備整體解決方案供應商，我們不止賣產品，我們更為客戶提供全面而專業的售前指導和售后服務工作，直至廣大客戶的項目正常運轉！

欲知更多產品詳情，歡迎咨詢深圳市鵬科泰貿易有限公司

網址：https://pengketai.cn.alibaba.com/

電話：0755-86381816

傳真：0755-86381822