Test item 測試名稱： Plumbing Supply Fittings衛浴供水配件
Norm refer 涉及標準: CSA B125.1
Test info 測試內容：ClauseTestRe Shower Head(淋浴頭）physicalpart / 物理部分 （no movingparts) Shower Head (淋浴頭）physical part /物理部分 （with movingparts) Hand Shower (手持花灑）physical part /物理部分 （no movingparts) Hand Shower (手持花灑）physical part /物理部分 （with movingparts) Shower hose (花灑軟管)（No NSF part）/ physical part /物理部分 Stop Valve(供水閥）physicalpart / 物理部分 Faucet（水龍頭）physical part/ 物理部分 （normal） NSF PART (MetalOnly) NSF PART (Metal and OrganicMaterial)4Design Res設計要求4.1.1Ratedpressure 額定壓力4.1.2Rated temperature額定溫度4.1.3Seatingmembers 可替換的底座4.2Servicing維修4.3Installation安裝4.4Threadedconnections 螺紋連接4.5Connections other thanthreaded connections 螺紋以外的連接4.6Accessibledesign 易操作設計4.8Cover plates andescutcheons 安裝蓋4.9Toxicity毒性分析4.1Frost-prooffaucet and hydrants 防結霜水龍頭以及消防龍頭4.11Shower heads,body spray, and hand-held showers 淋浴頭、淋浴噴嘴以及手持淋浴裝置4.12Cross-flow交叉流4.13Fittingsincorporating electrical features 帶電的配置4.14Materials材料 Copperalloy 銅合金 Stainless steel alloy不銹鋼合金4.15Automaticcompensating valve temperature control 自動溫度補償閥門4.16Lawn and sedimentfaucets 草坪以及沉積水龍頭5Performanceres and test methods 性能要求以及測試方法5.2Coatings鍍層5.2.2Corrosion（all substrates andcoatings） 腐蝕測試（所有的基體與鍍層）5.2.3Adhesion粘附力5.2.3.2Electrodeposited andPVD coatings on metals 金屬基體上的電鍍層以及PVD鍍層5.2.3.3Electrodepositedand PVD coatings on plastics 塑料基體上的電鍍層以及PVD鍍層5.2.3.4Organiccoatings 有機鍍層5.2.4Decorative organiccoatings 裝飾用的有機鍍層5.2.4.2Waterdegradation 水退化5.2.4.3Soap and cleanereffects 耐堿以及耐清潔5.2.4.4Abrasionresistance 耐磨性5.3Pressure andtemperature 壓力以及溫度5.3.1Static and dynamicseals 靜態以及動態的密封性能5.3.2Burstpressure 爆破壓力5.3.3Cross-flow checkvalves 交叉流檢查閥門5.3.4Hoseassemblies 軟管配件5.3.5Ball joint球窩接頭5.3.6Diverters分流器5.3.6.1divertersfor bath and shower 浴盆以及淋浴分流器5.3.6.2diverters forkitchen and lavatory 廚房水槽以及洗臉盆分流器5.4Flow rate流速測試 5.6Lifecycle 壽命測試（500000 cycles）(臺盆、水槽龍頭) 250000 cycles（浴室、花灑龍頭） 150000cycles（自關龍頭） 50000 cycles（婦洗器龍頭） 10000cycles （花灑頭、花灑軟管調節） 2000cycles（供水閥）5.7Resistance toinstallation loading 抵抗安裝負荷5.7.1Bendingstrength 抗彎強度5.7.2Thread tor 扭力測試5.8Resistance to useloading 抵抗使用負荷5.8.1Operatingcontrol 操作控制5.8.2Maintenance of installedposition 安裝位置的維護5.8.3Swing spoutstrength 擺動噴嘴強度5.9Backflowprevention 防逆流性 5.1Automaticcompensating valve 自動補償閥門6Marking標識NSF 部分的樣品要求： Metals only: 3 pcsof samples, 7-9 weeksOrganics only: 1 pc (see note)"7-9 weeksComplete test 4 pcs (see note); 7-9weeksNote: the sample No. for the organic test is baseon the water volume of the faucet. If the faucet can hold not lessthan 150 ml water, we will only need 1 sample. If less than that,you will need to provide more samples which can give us the 150 mlwatervolume. 其他部分的樣品要求：5sets of samples with installation instruction anddrawing.The TAT shall be 4 weeks.
Sample for reference 參考圖片:
Sample Report 報告樣本：
