食品級ABS德國巴斯夫 2802TR       高透明食品級ABS，F(xiàn)DA認證

StyrolutionTerlux? 2802 TR MABS

Polymer,Thermoplastic,ABS Polymer,Acrylonitrile Butadiene Styrene(ABS), Transparent, MoldedStyrolution產品說明:

Terlux 2802 TR is a standard injection molding MABS grade fortranparent parts.

Information provided by STYROLUTION, which is a joint venturebetween BASF and INEOS.

Styrolution Terlux? 2802 TR MABS 物性表

物理性能額定值 (公制)額定值 (英制)測試方法吸水率0.70 %0.70 %ISO 62平衡吸濕0.35 %0.35 %23°C/50% R.H.; ISO 62線性成型收縮率0.0055 cm/cm0.0055 in/inASTM Data; MD熔體流動速率2.0 g/10 min

@Temperature 200 °C

2.0 g/10 min

@Temperature 392 °F

ISO 1133機械性能額定值 (公制)額定值 (英制)測試方法抗張強度(屈服)48.0 MPa6960 psi50mm/min; ISO 527
48.0 MPa6960 psi2 in/min; ASTM Test伸長率 (斷裂)12 %12 %50mm/min, Nominal strain; ISO 527屈服伸長率4.0 %4.0 %50mm/min; ISO 527拉伸模量2.00 GPa290 ksi1mm/min; ISO 527
2.00 GPa290 ksiASTM Test懸壁梁缺口沖擊強度0.690 J/cm

@Thickness 3.17 mm

1.29 ft-lb/in

@Thickness 0.125 in

ASTM Test簡支梁無缺口沖擊強度12.0 J/cm257.1 ft-lb/in2ISO 179
8.00 J/cm2

@Temperature -30.0 °C

38.1 ft-lb/in2

@Temperature -22.0 °F

ISO 179簡支梁缺口沖擊強度0.500 J/cm22.38 ft-lb/in2ISO 179
0.200 J/cm2

@Temperature -30.0 °C

0.952 ft-lb/in2

@Temperature -22.0 °F

ISO 179電氣性能額定值 (公制)額定值 (英制)測試方法體積電阻率>= 1.00e+13 ohm-cm>= 1.00e+13 ohm-cmIEC 60093介電常數2.8

@Frequency 1.00e+6 Hz

2.8

@Frequency 1.00e+6 Hz

IEC 60250
2.9

@Frequency 100 Hz

2.9

@Frequency 100 Hz

IEC 60250耗散因數0.014

@Frequency 1.00e+6 Hz

0.014

@Frequency 1.00e+6 Hz

IEC 60250
0.016

@Frequency 100 Hz

0.016

@Frequency 100 Hz

IEC 60250相比耐漏電起痕指數(CTI)600 V600 VIEC 60112熱性能額定值 (公制)額定值 (英制)測試方法線形熱膨脹系數 - 流動80.0 μm/m-°C44.4 μin/in-°FISO 11359載荷下熱變形溫度(0.46 MPa)94.0 °C201 °Fannealed; ASTM Test
94.0 °C201 °FISO 75載荷下熱變形溫度(1.8 MPa)90.0 °C194 °Fannealed; ASTM Test
90.0 °C194 °FISO 75維卡軟化溫度91.0 °C196 °FRate "A" Loading 1 (50 degC/h 10N); ASTM Test
93.0 °C199 °F(50 °C/h / 50N) - B/50; ISO 306玻璃化轉變溫度，Tg107 °C225 °F10 K/min; ISO 11357-1/-3光學性能額定值 (公制)額定值 (英制)測試方法Transmission, Visible80 %80 %unknown thickness加工性能額定值 (公制)額定值 (英制)測試方法加工（熔體）溫度229 - 260 °C444 - 500 °FInjection Molding
250 °C482 °FInjection molding模具溫度48.9 - 73.9 °C120 - 165 °FInjection Molding
90.0 °C194 °FEjection temperature射速60.0 mm/sec2.36 in/secInjection molding干燥溫度70.0 °C158 °FInjection Molding干燥時間2 - 4 hour2 - 4 hourInjection Molding水分含量0.70 %0.70 %ASTM Data材料描述
測試方法顏色Clear
商業地位North America and Europe
Impact ModifiedYes
Injection Molding Regrind<10%
NSF Std. 51No
NSF Std. 61No
Primary Processing Techni Molding
加工Blow Molding
Film Extrusion
Injection Molding
Profile Extrusion
Sheet Extrusion
Thermoforming
Special characteristicPlatable
UL.UL-CYes

      食品醫療包裝部：食品級醫療級PP，PE，PVC，ABS，PC，PC/ABS，PA6，PA66，,PA6T，PA9T，PAMXD6，IXEF，PA11，PA12，PBT，PET,PPS，LCP，PPSU，PSU，PVDF，PEEK，TPU，TPV，TPE，食品級降解塑料（PBAT，PLA，PBS，PBST）等。

      免費提供原料：物性表，UL黃卡，隨貨同行(提供)SGS,MSDS,FDA,LFGB,USP,COA,PFOS,REACH,ROSH/SONY等資料。